Cli Commands - Spectracom SecureSync 1200 User Reference Manual

APPENDIX
3.
Depending on which network protocol you are using (SSH, Telnet), you will need to
enter authentication upon establishment of the connection either in a separate authen
tication window, or the Terminal window: The default user name is
password
4.
Using the Terminal window, you can now submit commands; see "CLI Commands"
below for a list of commands.
5.3.2 CLI Commands
SecureSync features a suite of command-line interface (CLI) commands that can be used to con
figure parameters and retrieve status information or log files via a remote connection, using the
telnet
This section includes a list of some of the supported commands.
Notes:
a. The command "
tax ( Note : Typing "
information).
b.
You can scroll up or scroll down through the output by using the Page Up/Page down
keys, or the arrow keys.
492
Data bits : 8
Parity : None
Stop bits : 1
Flow control : None
.
admin123
or (if enabled) protocol.
ssh
" will provide a list of all available commands and their syn
helpcli
" will output bash shell help only and will not provide useful
help
, and the
spadmin
SecureSync User Reference Guide