Checking Grounding Wires; Connector - Kubota M8540 Workshop Manual

Hide thumbs Also See for M8540:

Table of Contents

M8540, M9540, WSM

(3) Checking Grounding Wires

Grounding Wire

1. Check the whether the grounding wire (1) is connected securely

to the tractor chassis.

2. If the grounding wire is broken or disconnected, replace it.

(1) Grounding Wire

(2) Grounding Connector

Checking Connector

1. When inspect the circuit line, check the related connectors.

2. Disconnect the connectors and check their terminals for

contamination and deformation.

3. Check to see that cable does not broken or terminals are not

shelled off.

4. If any defective parts are found, repair or replace them.

• Connect connector surely after checked.

ELECTRICAL SYSTEM

[A] ROPS Model

[B] CABIN Model

KiSC issued 09, 2008 A

Table of Contents