Eoi Features - Toshiba G9 ASD Quick Start Manual

Figure 21. The G9 ASD Electronic Operator Interface Features.
Selected
item: (01)
Number
of items (14)

EOI Features

LED Screen — Displays the running frequency, active Fault, or active Alarm information.
Rotary Encoder — Used to access the ASD menu selections, change the value of a displayed
parameter, and performs the Enter key function. Turn the Rotary Encoder either clockwise or
counterclockwise to perform the Up or Down functions of the displayed menu selection. Press the Rotary
Encoder to perform the Enter (select) function.
LCD Screen— Displays configuration information, performance data (e.g., output frequency, bus
voltage, torque, etc.), diagnostic information, and LED Screen information in expanded normal text.
Local/Remote Key — Toggles the system to and from the Local and Remote modes. The Local/
Remote Key is disabled while the Fault screen is displayed. The LED is on when the system is in the
Local Command mode. The Local mode allows the Command and Frequency control functions to be
carried out via the EOI.
The Remote mode enables the Command and Frequency control functions to be carried out via the
Terminal Board, RS485, Communication Card, Pulse Input, or the settings of F003/F004. The
selection may be made via Program  Fundamental  Standard Mode Settings  Command Mode and
Frequency Mode 1, respectively.
The availability of Local mode control (Command and Frequency control) may be disabled via Program
 Utilities  Prohibition  Local/Remote Key Command Override and Local/Remote Key
Frequency Override. The availability of the Local mode of operation may be reinstated by changing this
setting or performing a Reset (see F007). See the section titled Command Mode and Frequency Mode
Control in the G9 ASD Installation and Operation Manual for more information on the Local/Remote
Key operations.
ESC Key — Returns the system to the previous level of the menu tree, toggles between the EOI
Command screen and the Frequency Command screen, or cancels changes made to a field if pressed
while still in the reverse video mode (dark background/light text). The three functions are menu-specific.
Run Key — Issues the Run command while in the Local mode. The Run key LED illuminates green
while stopped or red while running to alert personnel.
Mode Key — Provides a means to access the three root menus. Pressing the Mode Key key repeatedly
loops the system through the three root menus (see
menus, the Program menu will display the root menu screen or the Program sub-menu item being
accessed prior to pressing the Mode key.
G9 ASD Quick Start Guide
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
01:14
Program
Fundamental...
Terminal...
Direct Access...
Utilities...
Protection...
Rotary Encoder
Local/Remote
Key (LED)
Run Key
(LED)
Stop-Reset Key
Figure 25 on pg. 29). While looping through the root
LED Screen
LCD Screen
Escape Key
Mode
Key
25