Fine-Tuning The Current Security Mode; Switching To A Different Security Mode - Ruckus Wireless ZoneDirector 1100 User Manual

Figure 103. Viewing WLAN security configurations from the Monitor > WLANs page

Fine-Tuning the Current Security Mode

To keep the original security mode and fine-tune its settings:
1 Go to Configure > WLANs.
2 In the Internal WLAN row, click Edit.
3 Choose from the following options to keep the default WPA encryption with no
authentication (Open Auth).
• WPA2: Switch to this encryption method if you prefer the IEEE 802.11i
standard, which provides the highest level of security, but is limited to devices
with newer wireless NICs.
• WPA-Mixed: Allows both WPA and WPA2 compliant devices to access the
network.
• Passphrase: Replace the current passphrase with a new one, to help lower
the risk of unauthorized access.
4 Click OK to apply any changes.

Switching to a Different Security Mode

You also have the option of replacing the default internal WLAN's Open authenti-
cation/WPA encryption mode with one of several other modes:
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
Customizing WLAN Security
Fine-Tuning the Current Security Mode
193