Related Manuals for Hozelock Pico Power 7920
Summary of Contents for Hozelock Pico Power 7920
- Page 1 7920 Pico Power Pressure Washer Hozelock Ltd. Midpoint Park, Birmingham, B76 1AB. England www.hozelock.com Tel: 01702 482 760 Year www.hozelock.com guarantee 33608-000...
- Page 2 Contents Assembly & Operation...
- Page 3 Ø12.5mm...
- Page 5 SAFETY “DO NOTS” (Original Instructions) CAUTION High pressure jets can be dangerous if subject to misuse. Do not direct Read these instructions carefully before the water jet at people, animals, live using this machine. This machine is intended for domestic use electrical equipment or the machine (non-professional) use only.
-
Page 6: Electrical Safety
hazardous alteration of operating operating this equipment. performance. Before pressing the trigger, grip the gun Do not leave the appliance unattended firmly to counteract the recoil. when it is in operation. Ensure that the pressure washer is Make sure that cars do not drive over connected to the mains water supply in the high pressure hose. -
Page 7: General Information
IMPORTANT: As the colours of the wires appliance. in the mains lead of this product may not • Intake water pressure: Max 10 bar, Min 1 bar. correspond with the colours or markings • Operating ambient temperature: above 0°C. identifying the terminals in your plug, you Improper use should proceed as follows: •... -
Page 8: Using Your Pressure Washer
If one is not present, or if you are unsure, fit • Release the gun’s red safety button (X) (fig 9). a backflow preventer valve (such as the Hozelock • Depress the gun trigger and discharge any residual Non-Return Valve 2181) as per current regulations air inside the hose. -
Page 9: Maintenance
• Disconnect the lance extension from the gun and Troubleshooting return to its storage position (fig 17). • Return the gun to its storage position (fig 18). Problem • Remove the Inlet filter (fig 27) and return it to its Causes Remedy Possible... -
Page 10: Technical Data
2-3 minutes before repeating the start- the trigger time). up procedure (overload cut-out has been tripped). If the problem recurs more than once, call your Hozelock Consumer Services / Authorised Service Agent. -
Page 11: Warranty
Warranty Declaration of Conformity to CE This Hozelock product is covered under guarantee to Hozelock declare that the following Hozelock be free of defective parts and materials for a period of Pressure Washer: 2 years from the date of purchase, providing that the •... - Page 12 MODEL NUMBER SERIAL NUMBER Hozelock Ltd. Midpoint Park Birmingham, B76 1AB. England Tel: 01702 482 760 info@hozelock.com www.hozelock.com 33608-000...
Need help?
Do you have a question about the Pico Power 7920 and is the answer not in the manual?
Questions and answers