Replacing The Waste Ink Tank Before The Waste Ink Tank Confirmation Message Is Displayed - MIMAKI UJF-3042 MkII Original Instructions Manual

Chapter 4 Maintenance
Replace the waste ink tank with
another
1
The warning message "Check waste ink"
is displayed.
2
Press the
3
Press
and press the
• MAINTENANCE MENU will be displayed.
4
Press the
• "STATION" will be selected.
5
Press three times, and press the
key.
• "WASTE TANK " will be selected.
6
Remove the waste ink tank.
(1) Press the projection on the waste ink tank
box.
• The magnet is released and the door open.
push
Waste ink tank
holder
(2) By holding the waste ink tank, pull the tank to
remove.
• Put a cap on the waste
ink tank removed.
4-18
(MENU) in LOCAL.
to select "MAINTENANCE",
key.
key.
Waste ink tank
Cap
7
Replace the waste ink tank.
(1) Prepare a new waste ink tank (SPA-0173).
(2) Insert the waste ink tank by holding a handle
of the tank.
• Waste ink is equivalent to waste oil of industrial
waste. Request an industrial waste disposal
company for disposal of waste ink.
8
Press the
• The ink discharging amount that is controlled by
the machine is reset and the message is
cancelled.
Replacing the waste ink tank before the waste
ink tank confirmation message is displayed
To replace the waste ink tank before the waste ink tank
confirmation message appears (before the amount of
waste ink reaches 80% (1.3L) of 1.6L), use the same
procedure as in the previous section.
1
Perform steps 2 through 7 in "Replace the
waste ink tank with another" (
to empty the waste ink tank.
New waste ink
tank
key.
P.4-18)