Cleaning Instructions; Regular Cleaning; Vacuuming Heating Elements - Pelonis 1500W-II Operating Manual

CLEANING INSTRUCTIONS
4r------,
sensor
REGULAR CLEANING:
As dust collects on the air filter at the rear of the unit, the
filter should be removed, rinsed out in warm water, allowed
to dry completely, and reinstalled. Clean filter regularly.
VACUUMING HEATING ELEMENTS:
Some dust will pass through the air filter, and collect on the
ceramic heating elements. Clean unit regularly for optimum
airflow and performance. To clean, follow the steps listed
below:
1. Disconnect power supply at source by removing plug
from power outlet.
2. 'Loosen screw on backplate. It is not necessary to remove
the screw.
3. Turn, lift and remove backplate using handle at bottom.
4. Connect universal cleaning attachment, included with
your pelonis disc furnace
™
to your vacuum cleaner.
5. Remove dust and dirt by gently inserting vacuum attach-
ment past fan blades to the back of the heating discs.
6. Re-install backplate.
7. Gently tiohten screw on backplate.
WARNING:
Do not use the unit in Chlorine Gas, Sulphur
Dioxide, Inert Gas or other reducing gas atmospheres. Use
in such' environments will result in obvious darken-
ing/discoloration of the heating elements and the heating
elements will eventually deteriorate and arcing may result.