Imon Vfd; S/W, H/W Installation And Remote Controller; Installation Process; S/W Installation - SoundGraph iMON User Manual

4. iMON VFD

In the Box : 1 iMON PAD Remote Controller, 1 iMON VFD (Internal IR Receiver), 1 Extension
USB Cable, 1 Installation CD (iMON Manager, Multi-Median), 1 Quick Guide, 2 AAA Batteries
Please read this users guide before the installation of your iMON IR
Receiver.

1. Installation Process

1) S/W Installation

Insert 'iMON & Multi-Median Installation CD' to your CD ROM, and install iMON Manager and
Multi-Median according to the auto running S/W installation process.

2) H/W (IR Receiver) Installation

① External IR Receiver (iMON Station, iMON Knob) Installation
Connect your External iMON IR Receiver to your USB port, then assign the H/W driver according
to the 'Found New H/W Wizard'. Select CD ROM drive for searching H/W driver.
② Internal IR Receiver (iMON Inside, iMON VFD) Installation
Internal iMON Station can be loaded to the 3.5"(iMON Inside) or 5.25"(iMON VFD) disk drive
bay. The additional feature of internal type iMON IR receiver is that you can power on your PC
system using the power button of the remote controller. After turn off your PC system, open
your PC cover and connect the cable to its proper pin refer to the following picture. Internal IR
receiver is connected to mainboard with two cables, PC case with one cable, Power Supply with
S/W, H/W Installation
and Remote Controller
-5-