Packet Interval - Panasonic KX-HDV430 Supplement Manual

KX‐HDV430 Software File Version 02.100 or later
1. 4.2.2 Network Status
Change the followings in "
(Before)
Value Range
(After)
Value Range
2. 4.3.2 Ethernet Port Settings
Add the following WEB setting.
Enable CDP
Description
Value Range
Default Value
Configuration File Reference

Packet Interval

Description
Value Range
Default Value
Configuration File Reference
3. 4.6.1 Call Control
Add the following WEB setting.
Group Call Pickup
Description
Value Range
Default Value
Configuration File Reference
Barge in
Description
Value Range
Default Value
Configuration File Reference
Setting Mode " on page 61.
• Disable
• LLDP
• Manual
• Disable
• LLDP
• CDP
• LLDP/CDP
• Manual
Selects whether to enable the CDP feature.
・Yes
・No
No
CDP_ENABLE
Specifies the interval, in seconds, between sending CDP frames.
1 - 3600
30
CDP_INTERVAL
Specifies the feature number for performing group call pickup.
0–4 digits (0–9, *, #)
Not stored.
NUM_PLAN_PICKUP_GROUP
Specifies the feature number for performing barging in.
0–4 digits (0–9, *, #)
Not stored.
NUM_PLAN_BARGE_IN