Advertisement
Advertisement
Related Manuals for Bang & Olufsen BeoCom 2
Summary of Contents for Bang & Olufsen BeoCom 2
- Page 1 BeoCom 2 Get started...
- Page 2 Before you start… ‘Get started’ contains instructions in how to BeoCom 2 BeoCom 2 set up the BeoCom 2 handset for use. The Getting started Guide Guide contains instructions in daily use of BeoCom 2. How to use these Guides The following examples show what a key or status display looks like in an instruction sequence.
-
Page 3: Table Of Contents
Registration of a handset to the base, 5 • Register the first handset • Register additional handsets • Name the handset • Set BeoCom 2 for one or two lines • Set the time and date The handset, 9 • The keypad •... -
Page 4: Charge The Handset Battery
Charge the handset battery If the handset requires charging, this occurs automatically when the handset is placed in the charger. When setting up BeoCom 2 for use, charge the handset for at least one hour before proceeding further! When you charge the handset: –... -
Page 5: Registration Of A Handset To The Base
Registration of a handset to the base The handset must be registered to the base. Up to 8 handsets can be registered to one base. To register the first handset… > Connect the base to a power outlet, as described in the BeoLine Guide. -
Page 6: Name The Handset
OK to store the name. The display prompts you to set BeoCom 2 for use with one or two lines. Refer to the description on the following page..rstuvwxyz&... If you register a previously named handset to the base, this name appears in the display when registration is complete. - Page 7 Set BeoCom 2 for use with one or two lines When naming is complete… Phone lines > Phone lines appears in the display. > Push the Track point up or down to select the number of lines. > Press OK to store. You can then set the clock.
-
Page 8: Set The Time And Date
Set the time and date The time is shown when the phone is not in use and when there is no new information in the display. The time and date are also shown with Caller ID and Redial information. When you have set the number of phone Set clock? lines…... - Page 9 A . V Used with the Track point to adjust the volume of Bang & Olufsen audio or video systems. Place a call on hold. HOLD Start and end a call. Press and hold to switch BeoCom 2 on or off completely.
- Page 10 The handset display Open the display… Living room > Press OK while the handset is in standby. 10:13 > Push the Track point down to view options in the display. > Press OK to select an option. Intercom Options in the main menu: Intercom…...
- Page 11 Display of new, unanswered calls While the handset is in standby, a menu in the display informs you of any unanswered calls you have received. The menu disappears when you have seen the calls, and the call information is moved to the Caller ID list. If you have set a primary line for outgoing calls, only new calls on this line are shown.
-
Page 12: The Handset
>> The handset display Display information in standby – examples Living room > The handset (named ‘Living room’) is in standby 10:13 and line 1 is selected – normal display. > The handset is not registered. Refer to the chapter Register ‘Register a handset to a base’... - Page 13 Troubleshooting via the display – the Alert Alert menu View? If conditions exist which affect the optimal use of your phone, the display backlight flashes and Alert appears in the display while the handset is in No contact standby. Alert remains in the display as long as with base the conditions apply.
- Page 14 Note that the surface of the handset may be damaged by rough treatment, such as knocking and scraping against hard or rough surfaces. BeoCom 2 can only be used with the Bang & Olufsen accessories shown: – Table charger – Wall charger...
-
Page 15: Index
Battery Charge the handset battery, 4 Charge the handset battery, 4 Cleaning BeoLine base Cleaning BeoCom 2, 14 Change the pincode, Guide p. 35 Open a base for registration, Clock Set the time and date, 8 , Guide p. 33 Guide p. - Page 16 >> Index Extension numbers Phone lines Select a primary line, Guide p. 17 Call and store extension numbers in the Phonebook, Guide p. 24 Conference call on one line – Three-Party Call, Guide p. 16 Switch between calls on both Handset Call another handset, Guide p.
- Page 17 Settings Advanced settings menu, Guide p. 34 Auto off-hook, Guide p. 35 Select a primary line, Guide p. 17 Flash time, Guide p. 35 Handset name, Guide p. 34 Indication of new calls, Guide p. 33 Language, Guide p. 35 Make a handset ‘personal’...
- Page 18 For your information… For the Canadian market only… NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equip- ment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.
- Page 20 >> For your information… For the American market only… This equipment complies with Part 68 of the Federal Communications Commission (FCC) rules for the United States. A label is located on the underside of the base unit containing either the FCC registration number and Ringer Equivalence Number (REN).
- Page 21 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harm-...
- Page 22 >> For your information… Technical specifications, features and the use thereof are subject to change without notice. 3510910 Version 1.0 1109...
- Page 24 www.bang-olufsen.com...
Need help?
Do you have a question about the BeoCom 2 and is the answer not in the manual?
Questions and answers