Frigidaire FHWC3650RS Installation, Use & Care page 9

Determine Wiring Hole Location
1.
Determine and clearly mark a vertical centerline on
the wall and cabinet bottom.
A Centerline
To wire through top:
2. Mark a line distance (A) from the right of the
centerline on the underside of the cabinet. Mark the
point on this line that is 1 1/2"(3.8cm) from back wall.
Drill a 1¼" (3.2 cm) diameter hole (B) through the
cabinet at this point.
hood Dim
model A
30" & 36" 8 5/8"
(21.9 cm)
models
To wire through wall:
1. Mark a line distance (A) from the right of the
centerline on the underside of the wall. Mark the point
on this line that is 1 1/2"(3.8cm)
the cabinet. Drill a 1¼" (3.2 cm) diameter hole (B)
through the rear wall at this point.
B
A
A Centerline
A
A
1 1/2"(3.8cm)
B
from wall,
not cabinet frame
Centerline
from the underside of
hood Dim
model A
30" & 36" 8 5⁄8"
(21.9 cm)
models
1 1/2"(3.8cm)
PREPARE THE LOCATION
Roof Venting
To make a 4 " x 10½" (10.8 cm x 26.7 cm) rectangular
¼
cutout on the underside of cabinet top and bottom:
1. 5
Mark lines (1.6 cm) and 4 " (10.8 cm) from the
8
back wall on the centerline of the underside of cabinet.
. Mark lines 5¼" (13.3 cm) to the right and left of the
centerline on the underside of cabinet.
.
Use saber or keyhole saw to cut a rectangular opening
for vent.
4. Repeat steps 1-3 for the underside of the top of the
cabinet.
Centerline
Cabinet cutouts
(10.8 cm)
Wall Venting
To make a 4 " x 10½" (10.8 cm x 26.7 cm) rectangle in
¼
the wall:
1.
Make 2 lines by measuring
(10.16 cm) down from underside of cabinet and mark on
the centerline on the back wall.
.
Mark lines 5¼" (13.3 cm) to the right and left of the
centerline on the wall.
. Use saber or keyhole saw to cut a rectangular opening
in the wall for the vent.
Cabinet
front
⁄ "
1
4
(0.63 cm)
4 "
(10.16 cm)
¼
5
*
/ (1.6 cm)
8
4/ "
1
5 /
1
4
"
4
(13.3 cm)
5 /
1
"
4
(13.3 cm)
*From wall, not cabinet frame
¼" (0.63 cm) and 4
Centerline
5 / " 5 / "
1 1
4 4
(13.3 cm) (13.3 cm)
EN-9
"