Headrests; Front Seat Heating - Skoda yeti Owner's Manual

›
Press the lever in direction of arrow
rest to its original position in the direction of arrow
on the seat backrest.

Headrests


Introduction
This chapter contains information on the following subjects:
Setting the height
Removing/fitting
Notice
The middle rear head restraint is only adjustable in two positions.
Setting the height
Fig. 67 Setting the height of the headrest
›
Grasp the restraint and move upwards in the direction of
›
To move the headrest down, press the securing button
arrow and hold it down while pressing the headrest in the direction of ar-
2
row .
3
» fig. 66 and fold back the seat back-
1
Check this by pulling
2.
» fig. 67.
1
in the direction of
A
Removing/fitting
75
75
Fig. 68 Removing/installing the headrest
›
To remove the headrest, pull it out of the seat backrest up to the stop.
›
Press locking button
A
straint in the direction of arrow
›
To insert the headrest, push the headrest into the seat backrest in the direc-
tion of arrow until the locking button clicks into place.
3

Front seat heating

The seat backrests and seats can be heated electrically.
Buttons for the seat heater
Left seat heating

Right seat heating

›
To turn on the heating to max, press the key or button.
By repeatedly pressing the button, the heat is turned down until it is com-
pletely switched off. The level of the seat heating is indicated by the number
of illuminated warning lights in the switch.
in the direction of arrow and pull out the head re-
1,
» fig. 68.
2
Fig. 69
Buttons for heating the front
seats
» fig. 69
Seats and head restraints

75