1. Manuals
  2. Brands
  3. HP Manuals
  4. Server
  5. ProLiant SL390s G7 2U
  6. User manual

HP ProLiant SL390s G7 4U User Manual

Half-width server
Hide thumbs Also See for ProLiant SL390s G7 4U:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Maintenance and Service Manual, Technical White Paper
HP ProLiant SL390s G7 4U Half-width Server

User Guide

Abstract
This document identifies the components and details the usage of the HP ProLiant SL390s G7 4U Half-width Server. This document is intended for the
person who installs, administers, and troubleshoots servers and storage systems. This person should be qualified in the servicing of computer
equipment and trained in recognizing hazards in products with hazardous energy levels.
Part Number: 632679-003
April 2013
Edition: 3

Advertisement

Table of Contents
loading

Related Manuals for HP ProLiant SL390s G7 4U

Summary of Contents for HP ProLiant SL390s G7 4U

  • Page 1: User Guide

    Abstract This document identifies the components and details the usage of the HP ProLiant SL390s G7 4U Half-width Server. This document is intended for the person who installs, administers, and troubleshoots servers and storage systems. This person should be qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.
  • Page 2 © Copyright 2011, 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

  • Page 3: Table Of Contents

    Contents Component identification ....................... 6 Front panel components ..........................6 Front panel LEDs and buttons ........................7 Rear panel components ..........................8 Rear panel LEDs and buttons ........................9 System board components ........................10 DIMM slots ........................... 11 System board switches ........................11 NMI functionality ...........................
  • Page 4 HP ROM-Based Setup Utility ......................39 Array Configuration Utility ......................40 Option ROM Configuration for Arrays ..................... 41 HP Insight Control server deployment (formerly RDP) ................41 Re-entering the server serial number and product ID ................42 Management tools ........................... 42 Automatic Server Recovery ......................
  • Page 5 Specifications ..........................69 Environmental specifications ........................69 Server specifications ..........................69 Support and other resources ......................70 Before you contact HP ..........................70 HP contact information ..........................70 Customer Self Repair ..........................70 Acronyms and abbreviations ......................78 Documentation feedback ......................82 Index ............................

  • Page 6: Component Identification

    Component identification Front panel components NOTE: This figure illustrates the left and right system trays. Item Description Front PCIe bracket (LP slot) VGA port Serial port (RJ45 style) SFP+/10 GigE port* QSFP/InfiniBand port* NIC 1 network port /iLO 3 sideband port NIC 2 network port iLO 3 network port USB connectors...

  • Page 7: Front Panel Leds And Buttons

    *By default, the HP NC543i 2-port 4x QDR IB/10Gb Adapter is configured as a dual-port 10 GigE device. If the InfiniBand Enablement kit is installed, then the onboard QSFP port functions as InfiniBand, and the device operates as a 1-port 10 GigE (SFP+) and 1-port QDR InfiniBand (QSFP).

  • Page 8: Rear Panel Components

    Item Description Status Off—No LAN connection exists. UID LED button Blue—Activated Flashing blue—System is being remotely managed. Off—Deactivated * A subnet manager is required to manage and control an InfiniBand fabric. The amber LED indicates if the InfiniBand port has been configured by an Active Subnet manager. Rear panel components Item Description...

  • Page 9: Rear Panel Leds And Buttons

    Rear panel LEDs and buttons Item Description Status Fan 8 power LED Off—Normal Amber—Fan has failed. Fan 7 power LED Off—Normal Amber—Fan has failed. UID LED button Blue—Activated Flashing blue—System is being remotely managed. Off—Deactivated Fan 4 power LED Off—Normal Amber—Fan has failed.

  • Page 10: System Board Components

    System board components Item Designator Description CPU 1 DIMM slot 6A CPU 1 DIMM slot 5D CPU 1 DIMM slot 4B CPU 1 DIMM slot 3E CPU 1 DIMM slot 2C CPU 1 DIMM slot 1F CPU 2 socket CPU2 VRD and CPU1 DIMM VRD SATA 6 Connector SATA 5 Connector SATA 1 Connector...

  • Page 11: Dimm Slots

    Item Designator Description CPU2 DIMM slot 1F CPU 1 socket CPU1 VRD Power connector RPS connector DIMM slots DIMM slots are identified by the numbers 1 through 6. DIMM population order is specified by the letters A through F. System board switches System maintenance switch Position Default...

  • Page 12: Nmi Functionality

    • Use the iLO Virtual NMI feature. • Short the NMI header. For more information, see the HP website (http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00797875/c00797875.pdf). Hard drive numbering The following figure illustrates the location of hard drives on the front of the system tray. Item...

  • Page 13: Battery Pack Leds

    Item Description SAS/SATA hard drive 2 SAS/SATA hard drive 3 SAS/SATA hard drive 4 SAS/SATA hard drive 5 SAS/SATA hard drive 6 SAS/SATA hard drive 7 SAS/SATA hard drive 8 Battery pack LEDs Item Color Description Green System Power LED. This LED is on when the system is powered up and 12 V system power is available.
  • Page 14 A fully-charged battery can normally preserve data for at least 2 days. The battery lifetime also depends on the cache module size. For more information, see the controller QuickSpecs on the HP website (http://www.hp.com). Double flash, then...

  • Page 15: Gpu Location

    GPU location Item Description GPU 1 GPU 2 GPU 3 GPU 4 GPU 5 GPU 6 GPU 7 GPU 8 Component identification 15...

  • Page 16: System Fans

    System fans The server has eight system fans located on the rear panel of the chassis. The following figure identifies the system fans by device number. CAUTION: To prevent damage to the server, do not install a combination of redundant and non-redundant fans.

  • Page 17: Operations

    Operations Power down the server WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment, remove the power cord to remove power from the server. The front panel Power On/Standby button does not completely shut off system power. Portions of the power supply and some internal circuitry remain active until AC power is removed.
  • Page 18 Remove the server from chassis. Repeat the previous steps to remove the right server from the chassis. Operations 18...

  • Page 19: Setup

    For more information on Care Packs, see the HP website (http://www.hp.com/hps/carepack). Rack planning resources The rack resource kit ships with all HP branded or Compaq branded 9000, 10000, and H9 series racks. For more information on the content of each resource, see the rack resource kit documentation.

  • Page 20: Space And Airflow Requirements

    HP servers draw in cool air through the front door and expel warm air through the rear door. Therefore, the front and rear rack doors must be adequately ventilated to allow ambient room air to enter the cabinet, and the rear door must be adequately ventilated to allow the warm air to escape from the cabinet.

  • Page 21: Power Requirements

    Because of the high ground-leakage currents associated with multiple servers connected to the same power source, HP recommends the use of a PDU that is either permanently wired to the building’s branch circuit or includes a nondetachable cord that is wired to an industrial-style plug. NEMA locking-style plugs or those complying with IEC 60309 are considered suitable for this purpose.

  • Page 22: Rack Warnings

    Rack warnings WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that: The leveling jacks are extended to the floor. • • The full weight of the rack rests on the leveling jacks. The stabilizing feet are attached to the rack if it is a single-rack installation. •...
  • Page 23 Rotate the tray handle to lock. Connect peripheral devices to the server. NOTE: This figure illustrates the left and right system trays. Item Description Front PCIe bracket (LP slot) VGA port Serial port (RJ45 style) SFP+/10 GigE port* QSFP/InfiniBand port* NIC 1 network port /iLO 3 sideband port NIC 2 network port iLO 3 network port...

  • Page 24: Installing The Operating System

    USB connectors *By default, the HP NC543i 2-port 4x QDR IB/10Gb Adapter is configured as a dual-port 10 GigE device. If the InfiniBand Enablement kit is installed, then the onboard QSFP port functions as InfiniBand, and the device operates as a 1-port 10 GigE (SFP+) and 1-port QDR InfiniBand (QSFP).

  • Page 25: Registering The Server

    Press the F9 key when prompted during the boot process to change the server settings using RBSU. The system is set up by default for the English language. For more information on the automatic configuration, refer to the HP ROM-Based Setup Utility User Guide located on the Documentation CD.

  • Page 26: Hardware Options Installation

    Hardware options installation Introduction If more than one option is being installed, read the installation instructions for all the hardware options and identify similar steps to streamline the installation process. WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them.

  • Page 27: Processor Options

    Rotate the drive carrier handle down. Install the server into the chassis ("Installing the server into the chassis" on page 22). Connect the peripheral devices to the server. Power up the server ("Powering up and configuring the server" on page 24). Processor options WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the...
  • Page 28 Open the processor locking lever and the processor socket retaining bracket. Do not remove the processor socket cover. IMPORTANT: Be sure the processor remains inside the processor installation tool. If the processor has separated from the installation tool, carefully re-insert the processor in the tool. Handle the processor by the edges only, and do not touch the bottom of the processor, especially the contact area.
  • Page 29 Align the processor installation tool with the socket, and then install the processor. THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To avoid damage to the system board: •...
  • Page 30 Press the tabs on the processor installation tool to separate it from the processor, and then remove the tool. Close the processor socket retaining bracket and the processor locking lever. The processor socket cover is automatically ejected. Remove the cover. CAUTION: Be sure to close the processor socket retaining bracket before closing the processor locking lever.
  • Page 31 Remove the heatsink protective cover. CAUTION: Heatsink screws should be tightened and loosened in alternating sequence. Do not overtighten the screws as this can damage the system board, connectors, or screws. When using a torque wrench, tighten the screws to 0.68 to 0.90 Nm (6 to 8 in-lb.) of torque. Install the heatsink: Position the heatsink on the processor backplate.

  • Page 32: Dimms

    • Install DIMMs in decreasing capacity with the largest DIMMs installed in the banks farthest away from each processor. • Use only HP DIMM part numbers listed in the server QuickSpecs. DIMM population order DIMM slot DIMM slot DIMM slot 6A &...

  • Page 33: Expansion Board Options

    Remove the server from the chassis ("Removing the server from the chassis" on page 17). Open the DIMM slot latches. Install the DIMM. Install the server into the chassis ("Installing the server into the chassis" on page 22). Connect the peripheral devices to the server. Power up the server ("Powering up and configuring the server"...
  • Page 34 Remove the expansion slot cover. Install a low-profile expansion board. Hardware options installation 34...

  • Page 35: Pcie Riser Board Option

    Install the PCI riser cage. Connect all necessary internal cabling to the expansion board. For more information on these cabling requirements, see the documentation that ships with the option. Install the server into the chassis ("Installing the server into the chassis"...
  • Page 36 Install the riser board. Install the PCI riser cage. Install the server into the chassis ("Installing the server into the chassis" on page 22). Connect the peripheral devices to the server. Power up the server ("Powering up and configuring the server"...

  • Page 37: Cabling

    Cabling SAS or SATA power cabling options For server-specific SAS or SATA power cabling installation instructions, see the installation sheet included with the option kit. Battery cabling for BBWC Cabling 37...

  • Page 38: Configuration And Utilities

    Enabling access to the Array Configuration Utility and Erase Utility (on page 43) SmartStart is included in the HP Insight Foundation suite for ProLiant. For more information about SmartStart software, see the HP Insight Foundation suite for ProLiant or the HP website (http://www.hp.com/go/foundation).

  • Page 39: Hp Rom-Based Setup Utility

    Selecting the primary boot controller • Configuring memory options • Language selection For more information on RBSU, see the HP ROM-Based Setup Utility User Guide on the Documentation CD or the HP website (http://www.hp.com/support/smartstart/documentation). Using RBSU To use RBSU, use the following keys: •...

  • Page 40: Array Configuration Utility

    RBSU by pressing the F9 key when prompted. After the settings are selected, exit RBSU and allow the server to reboot automatically. For more information on RBSU, see the HP ROM-Based Setup Utility User Guide on the Documentation CD or the HP website (http://www.hp.com/support/smartstart/documentation).

  • Page 41: Option Rom Configuration For Arrays

    For Linux servers, see the README.TXT file for additional browser and support information. For more information about the controller and its features, see the HP Smart Array Controllers for HP ProLiant Servers User Guide on the HP website (http://www.hp.com/support/SAC_UG_ProLiantServers_en). To configure arrays, see the Configuring Arrays on HP Smart Array Controllers Reference Guide on the HP website (http://www.hp.com/support/CASAC_RG_en).

  • Page 42: Re-Entering The Server Serial Number And Product Id

    ASR is a feature that causes the system to restart when a catastrophic operating system error occurs, such as a blue screen, ABEND (does not apply to HP ProLiant DL980 Servers), or panic. A system fail-safe timer, the ASR timer, starts when the System Management driver, also known as the Health Driver, is loaded. When the operating system is functioning properly, the system periodically resets the timer.

  • Page 43: Integrated Lights-Out 3 Technology

    For more information, go to the HP website (http://www.hp.com/go/hpsc) and click on Drivers, Software & Firmware. Then, enter your product name in the Find an HP product field and click Go. To access the server-specific page for this server, enter the following web address into the browser: http://www.hp.com/support/sl390sg7 (http://www.hp.com/support/sl390sg7)

  • Page 44: Redundant Rom Support

    USB support and functionality USB support HP provides both standard USB 2.0 support and legacy USB 2.0 support. Standard support is provided by the OS through the appropriate USB device drivers. Before the OS loads, HP provides support for USB devices through legacy USB support, which is enabled by default in the system ROM.

  • Page 45: Diagnostic Tools

    Diagnostic tools HP Insight Diagnostics HP Insight Diagnostics is a proactive server management tool, available in both offline and online versions, that provides diagnostics and troubleshooting capabilities to assist IT administrators who verify server installations, troubleshoot problems, and perform repair validation.

  • Page 46: Remote Support And Analysis Tools

    HP strongly recommends that you install HP Insight Remote Support software to complete the installation or upgrade of your product and to enable enhanced delivery of your HP Warranty, HP Care Pack Service, or HP contractual support agreement. HP Insight Remote Support supplements your monitoring 24 x 7 to ensure maximum system availability by providing intelligent event diagnosis, and automatic, secure submission of hardware event notifications to HP, which will initiate a fast and accurate resolution, based on your product’s...

  • Page 47: Proliant Support Packs

    Refer to the operating system support matrix (http://www.hp.com/go/supportos). Change control and proactive notification HP offers Change Control and Proactive Notification to notify customers 30 to 60 days in advance of upcoming hardware and software changes on HP commercial products. For more information, refer to the HP website (http://www.hp.com/go/pcn).

  • Page 48: Troubleshooting

    The HP BladeSystem c-Class Enclosure Troubleshooting Guide provides procedures and solutions for troubleshooting HP BladeSystem c-Class enclosures. This guide explains how to use the Insight Display to troubleshoot enclosures, and it includes a flowchart to help you navigate the troubleshooting process. To view the guide, see the HP website (http://www.hp.com/support/BladeSystem_Enclosure_TSG_en).

  • Page 49: Symbols On Equipment

    Warnings WARNING: Only authorized technicians trained by HP should attempt to repair this equipment. All troubleshooting and repair procedures are detailed to allow only subassembly/module-level repair. Because of the complexity of the individual boards and subassemblies, no one should attempt to make repairs at the component level or to make modifications to any printed wiring board.

  • Page 50: Symptom Information

    If the problem occurs randomly, what is the duration or frequency? To answer these questions, the following information may be useful: • Run HP Insight Diagnostics (on page 45) and use the survey page to view the current configuration or to compare it to previous configurations. •...
  • Page 51 Version Control Agent. The VCA gives you a list of names and versions of all installed HP drivers, Management Agents, and utilities, and whether they are up-to-date. HP recommends you have access to the server documentation for server-specific information. HP recommends you have access to the SmartStart CD for value-added software and drivers required during the troubleshooting process.

  • Page 52: Service Notifications

    LEDs. Depending on the model, the internal health LED and external health LED may either appear solid or they may flash. Both conditions represent the same symptom. For the location of server LEDs and information on their statuses, see the server documentation on the HP website (http://www.hp.com/support).

  • Page 53: Troubleshooting Flowcharts

    Troubleshooting flowcharts To effectively troubleshoot a problem, HP recommends that you start with the first flowchart in this section, "Start diagnosis flowchart (on page 53)," and follow the appropriate diagnostic path. If the other flowcharts do not provide a troubleshooting solution, follow the diagnostic steps in "General diagnosis flowchart (on page 54)."...

  • Page 54: General Diagnosis Flowchart

    General diagnosis flowchart The General diagnosis flowchart provides a generic approach to troubleshooting. If you are unsure of the problem, or if the other flowcharts do not fix the problem, use the following flowchart. Item "Symptom information (on page 50)" "Loose connections (on page 52)"...
  • Page 55 Guide located on the Documentation CD or see "Troubleshooting resources (on page 48)" "Breaking the server down to the minimum hardware configuration (on page 51)" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or see "Troubleshooting resources (on page 48)" •...

  • Page 56: Server Blade Power-On Problems Flowchart

    Server blade power-on problems flowchart Symptoms: • The server does not power on. • The system power LED is off or amber. Troubleshooting 56...
  • Page 57 Improperly seated component or interlock problem • Faulty internal component Item "Component identification (on page 6)" Maintenance and service guides for c-Class server blades, located on the HP website (http://www.hp.com/go/bladesystem/documentation) Integrated Lights-Out User Guide located on the HP website (http://www.hp.com/servers/lights-out) Troubleshooting 57...

  • Page 58: Post Problems Flowchart

    POST problems flowchart Symptoms: • Server does not complete POST NOTE: The server has completed POST when the system attempts to access the boot device. • Server completes POST with errors Possible problems: • Improperly seated or faulty internal component •...
  • Page 59 "Troubleshooting resources (on page 48)" "Breaking the server down to the minimum hardware configuration (on page 51)" or in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or see "Troubleshooting resources (on page 48)" "Symptom information (on page 50)"...

  • Page 60: Os Boot Problems Flowchart

    OS boot problems flowchart There are two ways to use SmartStart when diagnosing OS boot problems on a server blade: • Use iLO to remotely attach virtual devices to mount the SmartStart CD onto the server blade. • Use a local I/O cable and drive to connect to the server blade, and then restart the server blade. Symptoms: •...
  • Page 61 Guide located on the Documentation CD or see "Troubleshooting resources (on page 48)" • Controller documentation "HP Insight Diagnostics (on page 45)" or in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or see "Troubleshooting resources (on page 48)" •...

  • Page 62: Server Fault Indications Flowchart

    * See the server blade OS boot problems flowchart (on page 60) Server fault indications flowchart Symptoms: • Server boots, but a fault event is reported by Insight Management Agents • Server boots, but the internal health LED, external health LED, or component health LED is red or amber Troubleshooting 62...
  • Page 63 • System overtemperature condition Item • "Integrated Management Log (on page 45)" or in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or see "Troubleshooting resources (on page 48)" • "Event list error messages" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or see "Troubleshooting...
  • Page 64 Troubleshooting 64...

  • Page 65: Post Error Messages And Beep Codes

    POST error messages and beep codes For a complete listing of error messages, refer to the "POST error messages" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or on the HP website (http://www.hp.com/support). WARNING: To avoid potential problems, ALWAYS read the warnings and cautionary information in the server documentation before removing, replacing, reseating, or modifying system components.

  • Page 66: System Battery

    System battery If the server no longer automatically displays the correct date and time, you might have to replace the battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years. WARNING: The computer contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline battery pack.

  • Page 67: Regulatory Information

    Regulatory information Safety and regulatory compliance For safety, environmental, and regulatory information, see Safety and Compliance Information for Server, Storage, Power, Networking, and Rack Products, available at the HP website (http://www.hp.com/support/Safety-Compliance-EnterpriseProducts). Turkey RoHS material content declaration Ukraine RoHS material content declaration Warranty information HP ProLiant and X86 Servers and Options (http://www.hp.com/support/ProLiantServers-Warranties)

  • Page 68: Electrostatic Discharge

    Electrostatic discharge Preventing electrostatic discharge To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices.

  • Page 69: Specifications

    750 W at 100 VAC input Rated steady-state power 1200 W at 200–240 VAC input System input requirements information is based on measurements with hardware available at the time of publishing this document. For updated information, see the HP website (http://www.hp.com/go/hppoweradvisor). Specifications 69...

  • Page 70: Support And Other Resources

    Active Health System log (HP ProLiant Gen8 or later products) Download and have available an Active Health System log for 3 days before the failure was detected. For more information, see the HP iLO 4 User Guide or HP Intelligent Provisioning User Guide on the HP website (http://www.hp.com/go/ilo/docs).
  • Page 71 HP specifies in the materials shipped with a replacement CSR part whether a defective part must be returned to HP. In cases where it is required to return the defective part to HP, you must ship the defective part back to HP within a defined period of time, normally five (5) business days. The defective part must be returned with the associated documentation in the provided shipping material.
  • Page 72 HP sono realizzati con numerosi componenti che possono essere riparati direttamente dal cliente (CSR, Customer Self Repair). Se in fase di diagnostica HP (o un centro di servizi o di assistenza HP) identifica il guasto come riparabile mediante un ricambio CSR, HP lo spedirà direttamente al cliente per la sostituzione.
  • Page 73 Si, durante la fase de diagnóstico, HP (o los proveedores o socios de servicio de HP) identifica que una reparación puede llevarse a cabo mediante el uso de un componente CSR, HP le enviará dicho componente directamente para que realice su sustitución. Los componentes CSR se clasifican en dos categorías:...
  • Page 74 HP se hará cargo de todos los gastos de envío y devolución de componentes y escogerá la empresa de transporte que se utilice para dicho servicio. Para obtener más información acerca del programa de Reparaciones del propio cliente de HP, póngase en contacto con su proveedor de servicios local.
  • Page 75 Opcional – Peças cujo reparo feito pelo cliente é opcional. Essas peças também são projetadas para o reparo feito pelo cliente. No entanto, se desejar que a HP as substitua, pode haver ou não a cobrança de taxa adicional, dependendo do tipo de serviço de garantia destinado ao produto.
  • Page 76 Support and other resources 76...
  • Page 77 Support and other resources 77...

  • Page 78: Acronyms And Abbreviations

    Array Configuration Utility Automatic Server Recovery BBWC battery-backed write cache CONREP Configuration Replication utility Canadian Standards Association Customer Self Repair DDR3 double data rate-3 graphics processing unit HP SIM HP Systems Insight Manager Integrated Lights-Out Integrated Management Log Acronyms and abbreviations 78...
  • Page 79 keyboard, video, and mouse nonmaskable interrupt NVRAM nonvolatile memory ORCA Option ROM Configuration for Arrays PCIe Peripheral Component Interconnect Express PCI-X peripheral component interconnect extended power distribution unit POST Power-On Self Test preboot execution environment QuickPath Interconnect QSFP quad small form-factor pluggable RBSU ROM-Based Setup Utility RDIMM...
  • Page 80 RoHS Restriction of Hazardous Substances redundant power supply serial attached SCSI SATA serial ATA small form factor small form-factor pluggable SFP+ enhanced small form-factor pluggable SLAPM SL Advanced Power Manager solid-state drive TMRA recommended ambient operating temperature UDIMM unregistered dual in-line memory module unit identification universal serial bus Version Control Agent...
  • Page 81 Voltage Regulator Down Acronyms and abbreviations 81...

  • Page 82: Documentation Feedback

    Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback (mailto:docsfeedback@hp.com). Include the document title and part number, version number, or the URL when submitting your feedback.

  • Page 83: Index

    38 health LEDs 52 connection problems 52 HP Insight Diagnostics 45 connectors 6 HP ProLiant Essentials Rapid Deployment Pack 41 contacting HP 70 creating a disk image 41 iLO (Integrated Lights-Out) 43 IML (Integrated Management Log) 45 Declaration of Conformity 67...
  • Page 84 problem diagnosis 48 installation, server options 22, 26 installing hardware 26 processor 10, 27 installing operating system 24 processor installation tool 51 Integrated Lights-Out (iLO) 43 ProLiant Support Pack (PSP) 47 Integrated Management Log (IML) 45 PSPs, overview 47 LED, iLO 2 activity 7 rack installation 19, 22 LED, iLO 2 link 7 rack mounting hardware 22...
  • Page 85 status lights, battery pack 13 support 46, 70 support packs 38 supported operating systems 47 switches 11 symbols on equipment 49 system battery 66 system board components 10, 11 System Erase Utility 43 system power LED 13 technical support 70 telephone numbers 70 temperature requirements 20 troubleshooting 48, 51, 53...

Table of Contents