Connecting To A Wireless Network - Xerox Phaser 6510 User Manual
Hide thumbs
Also See for Phaser 6510:
- Quick use manual (5 pages) ,
- Installation manual (2 pages) ,
- User manual (229 pages)
Table of Contents
Advertisement
Installation and Setup
Connecting to a Wireless Network
A wireless local area network (WLAN) provides the means to connect two or more devices in a LAN
without a physical connection. The printer can connect to a wireless LAN that includes a wireless router
or wireless access point. Before connecting the printer to a wireless network, the wireless router must be
configured with a service set identifier (SSID) and any necessary credentials.
Note:
Wireless networking is available only on printers with the optional Wireless Network Adapter
installed.
Installing the Wireless Network Adapter
The optional wireless network adapter plugs in to the back of the printer. After the adapter is installed,
and wireless networking is enabled and configured, the adapter is able to connect to a wireless network.
To install the Wireless Network Adapter:
1.
Power off the printer.
2.
To remove the Wireless Network Adapter Port Cover, press down the latch, then pull the cover away
from the printer.
38
Xerox
Phaser
6510 Color Printer
®
®
User Guide
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Phaser 6510 and is the answer not in the manual?
Questions and answers
092-319 What does this mean?