Advertisement
1.
Poly Tray
4.
Latch Stand Bracket
7.
Latch Lock Lever
2.
Wheel Support
5.
Draw Bar Tongue
8.
Hitch Bracket
3.
Latch Stand Plate
6.
Wheels (2)
9.
Axle
TOOLS
REQUIRED
FOR ASSEMBLY
(1)
Phillips Screwdriver
(1)
Pliers
(2)
7/16" Wrenches
(2)
1/2" Wrench
(2)
9/16" Wrenches
STEP 1: (SEE FIGURE 1)
•
Verify that all parts and all fasteners on pages 2 and
3 are included in the carton and parts bag. Refer
to page 2 to identify fasteners used in the following
instructions.
Place the latch lock lever (7) through the slot in the
tongue (5). Assemble the hex bolt (A) through the
tongue, the lever, and two (SEMS) hex nuts (G)
placed on each side of the lever. Assemble the nylock
nut (F) onto the end of the hex bolt (A) and tighten
so that the hex bolt (A) can still rotate freely. Tighten
the two (SEMS) hex nuts (G) against each side of the
latch lock lever (7) so that it is centered in the slot.
FIGURE 1
Advertisement
