Mounting; Basic Alignment; When The Shot Is Low; When The Shot Is High - Swarovski Optik HABICHT P Instructions For Use And Care Manual

EN DE

Mounting

Basic alignment

To ensure perfect alignment of the scope to the rifle, please
entrust mounting of the scope to a competent gunsmith.
The reticle has been factory-set to the mechanical middle
position. Prior to mounting you can check the correct position
of the reticle. To do this, unscrew the screw-on caps of the
elevation adjustment turret and windage adjustment turret
and turn the respective knurled knob counter-clockwise until
it stops.
a) PF, PV
Now turn the respective knurled knob 1
b) PVI-2 4-16x50 P, PVI-2 6-24x50 P,
PV 4-16x50 P, PV 6-24x50 P
• Elevation adjustment
PVI-2/PV 4-16x50 P: turn the knurled knob 3 turns clock-
wise.
PVI-2/PV 6-24x50 P: turn the knurled knob 4 turns clock-
wise.
• Windage adjustment
PVI-2/PV 4-16x50 P: turn the knurled knob 1
wise.
PVI-2/PV 6-24x50 P: turn the knurled knob 2
wise.
c) PV-S 6-24x50 P
• Elevation adjustment
Turn the knurled knob 2 turns clockwise.
• Windage adjustment
Turn the knurled knob 1 turn clockwise.
Alignment of the Scope to the Rifle
If the point of impact of the bullet deviates from the aiming
point, this can be easily and precisely corrected by adjusting
the elevation turret and the windage turret of the scope.
Regardless of corrections, the middle point of the aiming
mark always stays in the middle of the field of view.
18
1 / turns clockwise.
2
1 / turns clock-
2
1 / turns clock-
2
DE EN
a) PVI-2, PV-N, PV, PF
To make adjustments, simply unscrew the screw-on caps of
the elevation and windage turrets.
b) PV-S 6-24x50 P
To make adjustments here, use the knurled knobs of the
elevation and windage turrets.

When the shot is low

Turn the knurled knob of the
elevation turret in the direc-
tion of H.

When the shot is high

Turn the knurled knob of the
elevation turret in the oppo-
site direction to H.
When the shot is to the left
Turn the knurled knob of the
windage turret in the direc-
tion of R.
When the shot is to the right
Turn the knurled knob of the
windage turret in the oppo-
site direction to R.
The impact point correction per click can be taken from the
enclosed technical data sheet or the information printed
on the elevation or windage adjustment turret of your rifle
scope.
Zero Point Adjustment
Once you have aligned the scope to the rifle, you can retain
this basic setting. The scale for this is located on the respec-
tive knurled knob of the elevation/windage adjustment turret.
19