Error Codes - Gasboy atlas Service Manual

Pump Programming
Setting the DIP Switches
Switch
Number
1
2
3
4
5
6
7
8

Error Codes

When operating the pump/dispenser, the 9800 series unit shows a two-digit error transaction
code on the LCD display when transactions are terminated abnormally (that is, other than
turning the pump handle off).
The error codes are displayed for two seconds at the left of the LCD window, alternating with
a five-second display of the last sale amount. The display alternates between the two until a
new transaction begins. When an error occurs, note the error code and relay the information to
the system administrator.
Code
01
02
55
56
57
58
Transaction error codes are displayed only when the pump/dispenser is operating in the
Standalone mode. When the 9800 series unit is in the Online mode, connected to a CFN or
TopKAT, transaction error codes are transmitted back to the system with the completed
transaction data.
Page 5-12
Switch Function
Product 1
Product 2
Not Used
Unit of Measure
Pulser Multiplier
Number of Probes
Pulser Adder
ATC
Condition
RAM Failure
ROM Failure
Power Failure
Pulser Error
Timed Out
Limit Cutoff
DIP Switch Settings
Settings for Existing and Model
9850K
ON for Diesel, OFF for Gasoline
ON for Diesel, OFF for Gasoline
N/A
N/A
ON for 9850 and 9850K, OFF for
9852/9853
ON for two (2) probes, OFF for one
(1) probe
ON for 9840
ON for ATC ON, OFF for ATC OFF ON for ATC ON, OFF for ATC
MDE-4334C Atlas Start-up and Service Manual · April 2008
Configuring the 9800 Series
Settings for Models 9840K,
9852K, 9853K
ON for Diesel, OFF for
Gasoline
ON for Diesel, OFF for
Gasoline
N/A
ON for Liters, OFF for Gallons
N/A
ON for two (2) probes, OFF for
one (1) probe
ON for 9840K
OFF