Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Visiq FM3838BC
- Page 1 Bubble foot massager Model: FM3838BC Save this instruction book...
- Page 2 INTRODUCTION Proper use produces a measurable increase in blood circulation in the skin of the feet, which manifests itself in a pleasant and lasting feeling of warmth (rise in skin temperature). Foot massager baths at regular intervals can produce improved blood circulation in the feet and indirectly in the entire leg area as well.
- Page 3 8．DO NOT pull the unit by the cord, or use as a handle. 9．CLOSE SUPERVISION is necessary when the unit is used by, or near children, or invalids. 10．DO NOT use while sleeping, or if you feel drowsy. 11．USE ONLY on a flat level surface indoors, never use outdoors. 12．Discontinue use if you feel discomfort, pain or irritation results, never use for swollen or inflamed feet, or if feet have any skin eruptions.
-
Page 4: Care And Maintenance
TECHNICAL INFORMATION Model: FM3838BC 220-240V ~ 50/60Hz, 90W, Class II, IPX4 CARE AND MAINTENANCE: This appliance is for household use only; there are no user serviceable parts inside. Do not try to open or change the parts by yourself. Please refer to qualified electrical service or return to the nearest services centre if servicing is needed. - Page 5 TO FILL: Use warm water (at desired temperature), pour into the unit and do not fill over the “MAX” water-level line on the keel. This unit is designed to maintain the water temperature at a comfortable level, not to raise it. TO EMPTY: tilt the unit over a sink or tub to enable water to flow out through drain spouts.
- Page 6 FITTING THE ATTACHMENTS The stimulator attachments consist of: The 4 wheel attachments are fitted as shown in the diagrams below. MA X The 3 node attachments are fitted into the hole in the centre of the unit (as shown). NOTE: there are notches on the unit, line the attachments and push to insert.
-
Page 7: Disposal Information
PLUG REPLACEMENT (UK and Ireland only) This appliance may be fitted with a non-rewirable plug. If you need to change the fuse in a non- rewirable plug, the fuse cover must be refitted. If the fuse cover is lost or damaged, the plug must not be used until a replacement is obtained (available from the appliance manufacturer).
Need help?
Do you have a question about the FM3838BC and is the answer not in the manual?
Questions and answers