Troubleshooting By Symptom - Manitowoc indigo series Technician's Handbook
Air/water/remote condenser ice machine
Hide thumbs
Also See for indigo series:
- Technician's handbook (350 pages) ,
- Installation, use & care manual (92 pages) ,
- Technician's handbook (240 pages)
Table of Contents
Advertisement
Troubleshooting By Symptom
The troubleshooting procedures follow flow charts.
There are four symptoms, the symptom that you are
experiencing will determine which flow chart to use. The
flow chart asks yes and no questions to determine the
problem. The flow chart will direct you to a procedure
to correct the problem. Remote condenser, and self
contained models use separate charts.
SYMPTOM #1
Ice Machine Stops Running
Ice machine is in Ice Making cycle
or
Has a History of Shutting Down
•
Refer to Ice Machine Stops Running Flow Chart
SYMPTOM #2
Ice Machine has a Long Freeze Cycle.
Ice Formation is Thick
or
Thin Ice Fill on Inlet or Outlet of Evaporator
or
Low Production
Safety Limit #1 (possible)
•
Refer to Freeze Cycle Refrigeration System
Operational Analysis Table
SYMPTOM #3
Ice Machine Will Not Harvest - Freeze Cycle is Normal
and Ice Cubes are Not Melted After Harvest
Safety Limit #2 (possible)
•
Refer to Refrigeration Harvest Flow Chart
SYMPTOM #4
Ice Machine Will Not Harvest - Freeze Cycle is Normal
and Ice Cubes are Melted After Harvest
•
Refer to Ice Meltout Flow Chart
Part Number STH025 11/16
119
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the indigo series and is the answer not in the manual?
Questions and answers
Water not flowing through machine to freeze
Water may not be flowing through the Manitowoc Indigo series ice machine due to external issues such as low ambient temperatures, water pressure drops, or the water supply being turned off at certain times. Additionally, improper installation, refrigeration system failures, or electrical component malfunctions could also cause the issue. Checking external causes and ensuring proper installation and system operation is necessary to diagnose the problem.
This answer is automatically generated