Using Your Blood Pressure Monitor; Selecting Memory - Lloyds Pharmacy BM52 User Manual

Using your Blood Pressure Monitor

If the values between the two arms are significantly different, please consult your pharmacist or doctor to determine which arm
should be used for the measurement.
Important: The unit may only be operated with the original cuff. The cuff is suitable for an arm circumference of 22 to 36 cm.
A larger cuff for upper-arm circumferences of 35 to 44 cm can be obtained from www.lloydspharmacy.com
Correct posture
• Rest for approx. 5 minutes before each measurement.
Otherwise there may be divergences.
• You can perform the measurements either sitting or lying down.
Always make sure that the cuff is on a level with your heart.
• To carry out a blood pressure measurement, make sure you are sitting comfortably with your arms and back leaning on
something. Do not cross your legs. Place your feet flat on the ground.
• In order not to distort the result, it is important to keep still during the measurement and do not talk.
12

Selecting memory

Selecting memory
• Switch on the device with the Start/stop button.
When the device is switched off, the time and date are permanently
displayed.
• Select the desired user memory by pressing the function buttons
You have 2 memories, each with 60 memory spaces to store the measure-
ments of 2 different people separately.
Voice output when voice function
is active
The device is ready for use.
You may start measuring.
.
User memory 1
User memory 2
13