Countax A20/50 Operator's Manual

Hide thumbs

Table Of Contents

SPECIFICATION SUMMARY

MODEL

ENGINE

DISP

Briggs & Stratton

A20/50

570cc

Vanguard OHV

Engine Lubricant

Dimensions (approx.)

Length 1.96m (78")

1.7 litres

Inc Sweeper 3.07m (121")

Recommended SAE30 or 10W - 30 high quality

detergent oil classified for service; SG, SF, SE.

Height 1.17m (46")

Width 1.3m (51") (excluding Deck)

Read and follow the instructions in the engine

manufacturer's handbook.

Weight

Fuel Tank Capacity

A20/50

Sweeper

7 litres (1.5 gallons)

Net

PGC Capacity

390 litres

Transmission

Tuff Torq Heavy Duty Hydrostatic K62,

infinitely variable speed control with

Diff lock. Sealed for life lubrication.

130cm (51")

Countax Limited, Countax House, Great Haseley, Oxford OX44 7PF

Tel: (01844) 278800 Fax: (01844) 278792

Email: email@countax.com Website:www.countax.com

All figures are approximate. We reserve the right to change specification and price without notice E&OE

BORE

POWER

TORQUE

STROKE

39.5NM

14.9kw 20hp

72mm

70mm

@3600 rpm

@3600rpm

Turning Radius

125cm

Forward Speeds

0-7mph

325Kg

62Kgs

36Kgs

Recommended Tyre Pressure

FRONT

0.8-1.1KgF/cm (12-16lb PSI)

REAR

0.43-0.7KgF/cm (6*-10lb*PSI)

* Pressure recommended for maximum grip.

NEVER INFLATE ABOVE THE

MAXIMUM PRESSURE SHOWN

196cm (78")

Britain's Best Selling Range of Garden Tractors

A20/50

Garden Tractor

Version 3.0

OPERATORS MANUAL

Table of Contents

Need help?

Do you have a question about the A20/50 and is the answer not in the manual?

Questions and answers

Summary of Contents for Countax A20/50

Page 1: Operators Manual
NEVER INFLATE ABOVE THE Diff lock. Sealed for life lubrication. MAXIMUM PRESSURE SHOWN 130cm (51”) 196cm (78”) Version 3.0 Countax Limited, Countax House, Great Haseley, Oxford OX44 7PF Tel: (01844) 278800 Fax: (01844) 278792 Email: email@countax.com Website:www.countax.com A20/50 OPERATORS MANUAL Garden Tractor ®...
Page 2: Table Of Contents
-Page 2 and 3 EC Declaration of Conformity Controls and Indicators - Dashboard -Page 4 I, the undersigned A. Bennett of Countax Limited Great Haseley Oxford Controls -Page 5 and 6 OX44 7PF declare that the Lawnmowers described below :...
Page 3 9. Do not use steam cleaners or high pressure washers directly • Do not stop or start suddenly when going up or downhill. towards bearings or electrical components (Countax do not • Engage clutch slowly. Always keep machine in gear, recommend the use of these power cleaners).
Page 4: Cutter
An independent choke is fitted to the setting with choke, a warm one on the The headlights are turned ON by switching A20/50. This choke should be used in the rocker switch on. The headlights will FAST setting. The Choke setting should combination with a fast throttle setting to not operate when the ignition is OFF.
Page 5 HYDROSTATIC DUMP VALVE (FIG 4) To push or freewheel the A20/50 release the park brake then disengage the hydrostatic transmission by releasing the ‘dump’ valve. Simply pull the ‘dump’ valve lever ‘E’ (fig 4) outward.
Page 6: Controls -Page 5 And
Earth Connector th Connector For H.E. For H.E. The seat on the A20/50 is adjustable forwards and rearwards to suit the operator. Simply lift the seat latch at the front of the seat (fig 4) (B)Auxiliary fig 3 and slide the seat forwards or backwards to suit. Always ensure the...
Page 7: Mulch Deck
– but do not any loose connections - call your dealer. attempt to sharpen or replace them yourself. New Countax blades are not ELECTROMAGNETIC BLADE expensive and it is good practice to ask Printed Circuit Board...
Page 8: Rear Discharge Deck
Rear Discharge Deck Engine - General Maintenance AIR INTAKE/COOLING SYSTEM Specified Belts and Blades Engine/Deck Belt - B56 Dayco Super II - Pt No. 22940100 (IBS) The cooling fan also supplies the air to the carburettor. If the fig 1 Engine/Deck Belt - B57 Dayco Super II - Pt No.
Page 9: Cutter Deck Removal
NOTE: OIL SHOULD BE CHANGED Powered Grass Collector to collect. Either the Mulch Deck or WITHOUT FAIL AFTER THE FIRST the Rear Discharge Deck can be fitted to the A20/50 using the FIVE HOURS OF RUNNING. following instructions: Ensure that the Tractor is on...
Page 10: Cutter Deck - Check List
Cutter Deck - Check List Tyres - Removal of Wheels CUTTER FAILS TO START OR CUTS OUT REMOVAL OF FRONT fig 1 fig 2 fig 1 WHEN SWITCHED ON WHEEL Check: • Apply the Parking Brake. * Are you on the Tractor? – Unless you sit on the seat the safety •...
Page 11: Deck Levels - Front To Back
There are two possible solutions: (You need two people for this operation – one to lift the Deck * If the damage is not severe, treat with Countax tyre sealant (Pt No 52903501). while the other removes or relocates the Trunnion) Trunnion * If the damage is significant –...
Page 12: Cutter Levelling Side To Side
Collector Brush Cutter Levelling Side to Side LEVELLING SIDE TO SIDE If the Brush has become worn or damaged it is simple to 5. You can now slide off the Brush Bosses which each hold fig 1 replace the whole Brush Assembly or individual Brushes. three Brushes.
Page 13: Cutter - Drive Belt
Tractor and engage the PTO lever 3. Using a ruler or tape, measure the and check that the brush is revolving 4. Remove the belt and fit the Countax Transmission Drive Belts - A91 Dayco against the forward direction of the...
Page 14: Powered Collector
Powered Collector Collector Adjustments CONNECTION movement of Sweeper Locking Levers CONNECTING NET EMPTY ADJUST THE SWEEPING too high or too low – start at the TO TIP CUTTINGS on the threaded rod. Ensure the lock nuts highest setting and lower until it begins SOCKET HEIGHT To connect the Powered Collector to the...

Countax A20/50 Operator's Manual

Table of Contents

OPERATORS MANUAL

Need help?

Questions and answers

Related Manuals for Countax A20/50

Summary of Contents for Countax A20/50

Table of Contents