Power Take-Off Operation - Case HI farmall 45A Operator's Manual

SECTION 3 - FIELD OPEAATIOf\l
POWER TAKE·OFF (PTO) OPERATION
1. To engage the PTa , pull lever, 1, towards the
operator's seat and then push forward untit
handle engages the notch in the quadrant.
2. The PTa system is totally independent of the
tractor ground speed , and the following
operations can be performed.
• The tractor ground travel can be stopped
without stopping the PTa.
• Stop the PTa by disengaging the PTa clutch
without stopping the tractor ground travel.
3. To disengage the PTa , pUll lever, 1, fully rearward .
A
WARNING
A
Before attaching or detaching equipment or
changing the PTO shaft:
Apply the parking brake
Make sure all control levers are in the neutral
position and the PTO lever is in the
disengaged position .
Stop the engine and remove key.
Make sure that the PTO shaft has stopped
turning before getting off the machine.
Failure to comply could result in death or seriou s
injury.
1011421
A
WARNING
A
When the PTO is not in use, place the PTO clutch
lever in the disengaged position . Failure to
comply could result in death or serious injury.
1011423
3·10
14