Fuel Filter For 4Jh4-Te And 4Jh4-Hte - Yanmar 3JH4E Service Manual

6. Fuel Injection equipment
6.5.2 Fuel filter for 4JH4-TE and 4JH4-
HTE
(1) Fuel filter specifications
Item
Part No.
Fuel filter Filtration method
Filtration area
Filtration accuracy
Maximum flow
Pressure loss
Priming
Discharge
pump
Stroke
Water
Maximum capacity
separation
Note:
This fuel filter is equipped with water alarm
sensor for water level.
The water alarm sensor is used for C type panel.
(2) Fuel filter inspection
The fuel strainer
occasionally. If there is water or foreign matter
in the strainer bowl, disassemble the strainer
and wash with clean fuel oil to completely
remove foreign matter. Replace the element
every 250 hours of operation or every year,
whichever comes first.
Replace the filter prior to this interval if the
filter is very dirty, deformed or damaged.
Unit Specifications
- 129574-55820
- Paper element
2
0.24
m
μ
15
L/min 0.8
mm Hg 60 or less
3
15
cm /st
mm 8
3
120
cm
must be cleaned
240
Fuel filter
Priming
pump
Element
Drain plug
Drain tube
Air bleeding
bolt
Water sensor
010357-00E