ENGLISH
26
3
Turn the retaining rings anticlockwise (1)
and remove them (2).
4
Remove the shaving heads from the shaving
head holder and throw them away.
5
Place new shaving heads in the holder.
Note: Make sure the notches on both sides of the
shaving heads fit exactly onto the projections in the
shaving-head holder.
6
Place the retaining rings back onto the shaving
heads (1) and turn them clockwise (2).
Note: Hold the shaving head holder in your hand
when you reinsert the shaving heads and reattach the
retaining rings. Do not place the shaving head holder on
a surface when you do this, as this may cause damage.
7
Reattach the shaving head holder to the
bottom part of the shaving unit.
8
To reset the shaver, press and hold the on/off
button for approx. 7 seconds.