Error Codes Overview - Electrolux T4530 Service Manual

error codes overview

error Description
code
e 01
Not in use
e 02 Not in use
e 03 the input sensor has short circuited
The thermistor that measures air temperature at the drum inlet or the wires running to
the sensor has short circuited.
e 04 the output sensor has short circuited
The thermistor that measures air temperature at the drum outlet or the wires running
to the sensor has short circuited.
e 05 the fan motor has overheated (Motor 1)
The heat protection contact in the motor, or its cable stem, is open.
e 06 the drum motor has overheated (Motor 2)
The heat protection contact in the motor, or its cable stem, is open.
e 07 external error
e 08 machine overheated
Protection thermostats for inlet and outlet air.
One of the protection thermostats has opened due to overheating.
e 09 Filter lid open
e 10 Incorrect programming
One or more parameters are incorrect or is missing.
e 11 Drying error with RmC program
The longest permitted RMC time has been exceeded.
(Applies only to machines with RMC).
e 12 Drying error with autostop program
The longest permitted automatic stop time has been exceeded.
(Applies only to machines with automatic stop).
e 13 Drying error with time program
The set drying time is longer than longest permitted.
(Applies to tumble dryers that are connected to a payment system).
e 14 Gas error, push gas reset button
No flame has been detected. (Applies only to gas heated tumble dryers).
e 15 No vacuum detected
The vacuum/pressure switch does not close within 12 seconds of the tumble
dryer starting.
e 16 vacuum sensor has short circuited
The vacuum/pressure switch was already closed when an attempt was made
to start the tumble dryer.
e 17 the input sensor has disconnected
The inlet thermistor, or its wires, is open.
e 18 the output sensor has disconnected
The outlet thermistor, or its wires, is open.
troubleshooting
41