Network Configuration
•
Click Save to add the VPN connection.
Step 11
The VPN pane is updated to show the name and status of the new VPN connection
Step 12
Add a VPN connection of IPSEC/L2TP/PSK Type
To add a VPN connection of IPSEC/L2TP/PSK type, follow these steps:
Click VPN in the left pane under the Network tab.
Step 1
Step 2
Click
Step 3
The Add VPN connection window is displayed, as shown in
Step 4
In the Add VPN connection window, enter the name of the VPN connection that you want to add in the
Name field.
Step 5
Check the Connect automatically check box if you want the Cisco Edge 340 Series device to
automatically connect to this VPN.
Choose IPSEC/L2TP/PSK for the type of the VPN connection from the Type drop-down list.
Step 6
Figure 3-24
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
3-18
MPPE128
in the right pane.
Add VPN Connection—IPSEC/L2TP/PSK
Chapter 3
Configuring the Web GUI
Figure
3-24.
OL-29491-01