CONTENTS SET UP INSTRUCTIONS: 1. INSTALLING YOUR ROOF TOP TENT P2-3 2. SETTING UP YOUR ROOF TOP TENT P4-6 3. PACKING DOWN YOUR ROOF TOP TENT P7-9 4. TIPS & TRICKS IMPORTANT INFORMATION: 1. IF YOUR TENT WON’T OPEN 2. TROUBLE SHOOTING P12-13 3.
SET UP INSTRUCTIONS 1. INSTALLING YOUR ROOF TOP TENT 1. a) You must have roof racks correctly fitted to your vehicle before installling the Roof Top Tent 1. b) We recommend you place the Roof Top Tent in the load-bearing position 1.
Page 4
SET UP INSTRUCTIONS 1. d) Slide the M8X50 hexagon bolts into the rails from both sides ensuring you have positioned 8 in total (see picture 1) Plastic nut 1. e) Replace the plastic covers of your roof racks (see picture 2) M8X50 outer hexagon bolt Picture 2...
SET UP INSTRUCTIONS 2. SETTING UP YOUR ROOF TOP TENT 2. a) Open the tent cover and run the power cord to your 12V socket 2. b) Release all buckles around the base (Very important) 2. c) Release the buckle on the ladder 2.
Page 6
SET UP INSTRUCTIONS 2. e) Wait a couple of minutes for the tent to set up automatically 2. f) Hold the ladder, and then pull down 2. g) The ladder will open slowly 2. h) Pull on the ladder 180 degrees, then it will lock automatically.
Page 7
SET UP INSTRUCTIONS 2. i) Push the hard top up from bottom gently 2. j) Once the hard top is open, it will be fit to the right side automatically...
SET UP INSTRUCTIONS 3. PACKING DOWN YOUR ROOF TOP TENT 3. a) Press the hard top from up to down 3. b) Push the ladder lock up 3. c) The ladder will unlock and it can now be folded down. (Notice: Please do not push the lock of the ladder when someone is using it)
Page 9
SET UP INSTRUCTIONS 3. d) Lift up the ladder gently 3. e) Place the ladder onto the hard top 3. f) Ensure the power has ran to the tent from your car and press the “DOWN” button on the remote 3.
Page 10
SET UP INSTRUCTIONS 2. h) Lock the buckle on the ladder 2. i) Lock all buckles around the base...
SET UP INSTRUCTIONS 4. TIPS & TRICKS • Make sure the groove is cleaned before usage • When folding down and covering tent, make sure the tent is dry • If aluminium frame has water, just erect it and pour out the water •...
IMPORTANT INFORMATION If your Roof Top Tent won’t open, check the following: A. The power cord has been inserted into the 12V socket correctly B. Check that no objects are in the tent, check to ensure nothing is caught on the motorised rod C.
IMPORTANT INFORMATION TROUBLE SHOOTING: 1. Open the plastic part on the side of frame 2. Pull out the white transmission wire carefully 3. Unscrew the waterproof joint 4. Disconnect the waterproof joint Instructions continued on next page.
Page 14
IMPORTANT INFORMATION 5. Pull out the transmission wire from the frame hole right above 6. Pull out the waterproof joint 7. Use big size hexagon wrench to screw off the nut on the frame 8. Use small size hexagon wrench to screw off the nut on the tent pole 8.
IMPORTANT INFORMATION SPECIFICATIONS: Fly: 210D rip-stop polyoxford PU 2000mm with silver coating UPF50+ Inner: 190g polycotton PU 2000mm Floor: 600g (+- 10g) Heavy PVC floor Frame: Alu. Alloy Technology: 2 x Wireless remote control STRUCTURE: Person: 2 Inner tent size: 210(L) x 125(W) x 115/105cm(H) Packing Size: 235 x 140 x 38cm Net Weight: 64kg Gross Weight: 81kg...
Need help?
Do you have a question about the 379449 and is the answer not in the manual?
Questions and answers