Configuration; Gimbal Controller Descriptions - Tarot ZYX T2-2D User Manual

III. Configuration

1. Gimbal Controller Descriptions

Descriptions:
Power Supply:3S-6S Li (11V-26V)
Battery
* If you choose a battery to power up the gimbal and multi-rotor, please make sure this battery
meets requirements of both components.
Receiver
1、 Common Receiver: connect it to the CH1/SBUS and CH2 Channel in the gimbal main
controller. Also, set Receiver Type and corresponding channel in the assistant software.
2、 FUTABA SBUS or SBUS-2: connect it to CH1/SBUS channel in the gimbal main
controller.
MAKE SURE CH2 IS UNCONNECTED. Also, set Receiver Type and corresponding
channel in the assistant software.
3、 If you have 5V power supply to the receiver, please disconnect the 5V power of
CH1/SBUS channel.
Video Connect the video wireless transmission module to AV out port. DO NOT misconnect signal
and video cable.
Camera Connect Camera through the GoPro AV-OUT cable and charging cable.
@2016 TAROT All Rights Reserved.
TAROT
6