Configuring And Using Programmable Keys - Mitel MiVoice 6940 User Manual

Configuring and using programmable keys

Your Mitel MiVoice 6940 IP phone has 96 (16 visible at one time) programmable, multi-function,
self-labeling keys allowing you to program and use up to 96 functions.
Notes:
1. If Mitel M695 Programmable Key Modules (PKMs) are attached to the phone, you can configure
up to an additional 28 keys on each PKM.
2. The Mitel MiVoice 6940 IP phone allows up to three PKMs on each phone. For more information
about PKMs, see
If enabled by your System Administrator, you can program or edit the following functions on the
programmable keys by pressing and holding the respective programmable key for approximately
four seconds:
Function
Speed Call
Phone Lock
Call Forward Always
Do Not Disturb
Account Code Non Verified
Account Code Verified
Note: Programming keys using the press-and-hold method is dependent on your Class of Service
settings defined for your account on the MiVoice Business call server.
"Mitel M695 Programmable Key Module (PKM)"
Default label
N/A
Phone Lock
Fwd Always
DND
Acct Non-Ver
Acct Verified
Configuring and using programmable keys
Programmable
Keys
on page 92.
45