Do not expose the thermometer to temperature extremes (below –13 °F / –25 °C or over 131 °F / 55 °C) or excessive humidity (> 95 % RH). This thermometer must only be used with genuine Braun ThermoScan lens filters (LF 40).
To help avoid inaccurate temperature measurements, the probe before each measurement. tip is warmed to a temperature close to that of the human body. When the Braun Attach a new lens filter by ThermoScan is placed in the ear, it continuously monitors the infrared energy. The pushing the thermometer probe straight into the lens filter inside the box and then pulling out.
To display the stored clean lens filter. measurement, the The Braun ThermoScan ear thermometer turns off thermometer must be automatically after 60 seconds of inactivity. turned on. The thermometer can also be turned off by Press the Mem button.
Page 5
Make sure the probe tip and lens are clean Temperature taken is not within Additional lens filters (LF 40) are available at most stores carrying Braun ThermoScan. typical human temperature range and a new, clean lens filter is attached.
Guidance and manufacturer’s declaration – electromagnetic emissions Product specifications The ME equipment is intended for use in the electromagnetic environment specified below. The customer or the user of the ME equipment should ensure that it is used in such an environment. Displayed temperature range: 93.2 –...
Need help?
Do you have a question about the IRT 6020 and is the answer not in the manual?
Questions and answers