Clean And Transport Your Product; Cleaning; Transportation - Epson Stylus TX130 User Manual

Clean and Transport Your Product

If your printer gets dirty or you need to move it some distance, follow the instructions in these
sections:

Cleaning

Transportation

Cleaning
To keep the printer working at its best, you should clean it several times a year.
Caution:
Do not use a hard brush, benzine, alcohol, or paint thinner to clean the printer or you may damage
it. Do not place anything on top of the cover or use the cover as a writing surface, or it could get
permanently scratched. Do not use oil or other lubricants inside the printer or let water get inside
it.
1. Turn off the printer.
2. Unplug the power cable.
3. Disconnect the USB cable.
4. Remove all the paper.
5. Clean the sheet feeder using a soft brush.
6. Clean the outer case with a soft cloth dampened with mild detergent.
Transportation
If you need to ship your printer or transport it a long distance, prepare it for transportation as
follows:
1. Open the document cover and check that the print head is all the way to the right (the home
position). If not, turn on the printer.
2. Turn off the printer.
3. Unplug all the connected cables.
4. Remove all the paper.
102