D-Link Unified Switch CLI Command Reference
show wireless channel-plan proposed
This command displays the proposed channel plan changes for a manual request to run the channel algorithm. The channel
plan type argument must be specified. The channel algorithm is run separately for each radio frequency. The proposed
channel changes may be cleared or applied using the wireless channel-plan command. If the IP address is not entered,
the command displays a proposed summary for all peer switches. If a peer switch IP address is entered, detailed proposed
entries for that peer switch are displayed.
Format
show wireless channel-plan proposed {an | bgn} [<ipaddr>]
Mode
Privileged EXEC
Field
Description
ipaddr
The <ipaddr> is a valid IP address.
an
Configure channel plan mode for 802.11a/n.
bgn
Configure channel plan mode for 802.11b/g/n.
Current Status
Indicates the status of a manual channel plan request.
AP MAC Address
The managed AP Ethernet MAC address.
Location
A descriptive location string configured for the managed AP.
Radio
The radio interface on the managed AP.
Current Channel
The current channel on the managed AP radio.
New Channel
The new channel computed by the channel algorithm.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless channel-plan proposed a
Switch IP Address
------------------
10.0.0.1
10.254.22.1
10.254.22.15
(DWS-4026) #show wireless channel-plan proposed a 10.254.22.15
Current Status................................. Apply Complete
AP MAC Address
---------------- --------------------------- ----- ------- -------
00:00:85:00:50:00 Third floor
show wireless power-plan
This command displays status and configuration for automatic power adjustment. The command does not accept any
arguments.
Format
show wireless power-plan
Mode
Privileged EXEC
© 2009 D-Link Corporation. All Rights Reserved
232
Current Status
---------------
Apply Complete
Apply Complete
Apply Complete
Location
Current New
Radio Channel Channel
1
11
1
Need help?
Do you have a question about the DWS-4000 Series and is the answer not in the manual?
Questions and answers