Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Thunderbolt FL-200
- Page 1 MOVING HEAD BEAM THUNDERBOLT FL-200 Instruction Manual www.flash-butrym.pl...
-
Page 2: Table Of Contents
Content 1. Instruction----------------------------------------------------------------------------------------------------------------------------2 Application According to Purpose---------------------------------------------------------------------------------------------------------------------2 Safety and Maintenance----------------------------------------------------------------------------------------------------------------------------------2 Safety operation---------------------------------------------------------------------------------------------------------------------------------------------2 2. Lamp-----------------------------------------------------------------------------------------------------------------------------------3 Replacing the lamp----------------------------------------------------------------------------------------------------------- ------------------------------3 3. Supply Voltages, Mains Cord and Connection to Mains -------------------------------------------------- ------------------------------3 4 Housing---------------------------------------------------------------------------------------------------------------------------------4 5 Operating Environment-----------------------------------------------------------------------------------------------------------5 6. Installation---------------------------------------------------------------------------------------------------------------------------5 7. Operation-----------------------------------------------------------------------------------------------------------------------------6 -----------------------------------------------------------------------------------------------------------------------------6 7.1 Controls ------------------------------------------------------------------------------------------------------------6 7.2 Navigation in the Menu -----------------------------------------------------------------------------------------------------------------------7... -
Page 3: Instruction
Congratulations on purchasing this Beam 190 Thank you for extending your trust in our technology! For reasons of safety and approval (CE) the personal reconstruction and/or modification of this product is prohibited. Please observe that damage caused by modifications performed manually to this device is not covered by the warranty. This product leaves our works in a perfect condition. -
Page 4: Lamp
Do not operate without outer cover or lenses Do not look directly to the light Replace immediately when lamp broken Do not project directly to items near 0.5M Do not operate when temperature up to 40° C 2. Lamp ATTENTION: DANGER OF LIFE! RISK OF BURNS! RISK OF FIRE! During operation, the lamps will reach temperatures of up to 600°... -
Page 5: Housing
Products operating on supply voltage should be kept out of the reach of children. Therefore ensure the permanent supervision if children are in the immediate vicinity of the product! For commercial facilities the regulations on the prevention of accidents of the respective trade association must be observed. The operation of this equipment at schools, training facilities, and hobby or self-help workshops must be supervised responsibly by trained personnel. -
Page 6: Operating Environment
No metal parts or other items must enter the housing as this may reduce the protective insulation or trigger short circuits which may lead to fatal electric shocks! If metal parts or other items have entered, disconnect the mains plug immediately, secure the product against unintentional operation and contact your specialized dealer! Damage caused by metal parts or other items in the housing is exempt from warranty. -
Page 7: Operation
The light effect unit must be attached via two certified hooks and omega bracket to a tie-bar system. Use the screw threads on the undersurface only. It must be ensured that an expert inspects the mechanical and safety-relevant installation prior to the initial operation and following major modifications, prior to the renewed operation. -
Page 8: Dmx Protocol
LCD DISPLAY SELECT/ENTER YOUR BRAND Model Addr： ： ： ： 001 7.3 Menu setting The device starts not until a self-testing and starting time. If the moving head is ready to start, push and roll the function wheel. The LCD display shows the options, as below: Display Function Menu settings... - Page 9 DMX Value Feature Pan/tilt speed from fast to slow Control-channel 4 -Strobe DMX Value Feature No function Open Strobe, from slow to fast Strobe effect, open increasing Strobe effect, close decreasing Random strobe, from slow to fast Open Control-channel 5 – Dimming DMX Value Feature 0-100% dimming...
- Page 10 Color wheel clockwise rotation, from slow to fast, rainbow effect Control-channel 8 –Static Gobo wheel DMX Value Feature Blank Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Gobo 9 Gobo 10 Gobo 11 Gobo 12 Gobo 13 Gobo 14...
-
Page 11: Fuse
DMX Value Feature No function Reset after 5S No function Control-channel 11 - Fine pan movement DMX Value Feature 16-bit pan movement Control-channel 12 - Fine tilt movement DMX Value Feature 16-bit tilt movement 8. Fuse ATTENTION: DANGER OF LIFE! Disconnect the product from the mains prior before changing a fuse. - Page 12 Lamp：R5 200W Color temperature：8000K luminous flux：6600lm Lamp life: 2000Hrs Movement angle： Pan=540° Tilt=280° Movement speed： Pan=5s Tilt=3s Beam angle： Pan=8°Tilt=8° Signal:DMX512 Package size： 46.5×40.5×51cm Net weight： 14kg Gross weight: 17kg www.flash-butrym.pl...
Need help?
Do you have a question about the FL-200 and is the answer not in the manual?
Questions and answers