Cleaning Water Inlet Filters - Bosch WFT2806GB Instruction Manual And Installation Instructions

Cleaning / Maintenance

Cleaning water inlet filters

The water inlet filters must be cleaned if no
water, or only an insufficient amount of water,
runs into the machine when the tap is open
(see section "Rectifying minor malfunctions
yourself").
The filters are located in the screw type hose
connections at the tap and on the rear of the
machine.
Cleaning procedure:
1. Close the water tap.
2. Switch the unit on. Set the programme
selector to a desired wash programme
and press the "Start" button. After approx.
30 seconds set the programme selector
first to X, and then to the
(Water pressure in the supply hose is
relieved.)
3. Unscrew hose from tap and rinse filter un
der running water.
4. Reconnect hose.
5. Unscrew hose from back.
28
6. Use flat pliers to remove filter, clean and
replace.
position.
7. Reconnect hose.
8. Open tap and ensure that there is no
water leakage.
9. Close the tap.