Dell 1707FP Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Monitor
  5. 1707FP - UltraSharp - 17" LCD Monitor
  6. Manual

Dell 1707FP Manual

Color monitor for dell optiplex usff computer
Hide thumbs Also See for 1707FP:
Table of Contents

Advertisement

Quick Links

Dell™ 1707FP AIO Color Monitor For Dell™ OptiPlex™
USFF Computer

About Your Monitor

Front View
Back View
Side View
Bottom View
Monitor Specifications
Caring for Your Monitor
Using Your Adjustable Monitor Stand
Height Adjustment
Tilt Adjustment
Setting Up Your Monitor
Cable Connections on the Back of the Monitor and the
Computer
Removing the cable cover and cables from the computer
Detaching the Monitor from the Stand
Using the OSD
Setting the Optimal Resolution
Using the Dell Soundbar (Optional)
Information in this document is subject to change without notice.
© 2006 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell™, PowerEdge™, PowerConnect™, PowerVault™, Dell™ Dimension™, Inspiron™, OptiPlex™, Latitude™, Dell
Precision™ and Dell | EMC are trademarks of Dell Inc; Microsoft, Windows and Windows NT are registered trademarks of Microsoft
Corporation; Adobe is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions. ENERGY STAR is a
registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product
meets the ENERGY STAR guidelines for energy efficiency. EMC is a registered trademark of EMC Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their
products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
February 2006
Downloaded from ManualMonitor.com Manuals
Solving Problems
Troubleshooting Your Monitor
General Problems
Product Specific Problems
USB Problems
Troubleshooting Your Soundbar
Appendix
CAUTION: Safety Instructions
FCC Identification Information
Contacting Dell
Your Monitor Set-up Guide

Advertisement

Table of Contents
loading

Related Manuals for Dell 1707FP

Summary of Contents for Dell 1707FP

  • Page 1: About Your Monitor

    Trademarks used in this text: Dell™, PowerEdge™, PowerConnect™, PowerVault™, Dell™ Dimension™, Inspiron™, OptiPlex™, Latitude™, Dell Precision™ and Dell | EMC are trademarks of Dell Inc; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; Adobe is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions. ENERGY STAR is a registered trademark of the U.S.

  • Page 2: Front View

    Back to Contents Page About Your Monitor Dell™ 1707FP AIO Color Monitor For Dell™ OptiPlex™ USFF Computer Front View Back View Bottom View Side View Monitor Specifications Caring for Your Monitor Front View Video input select OSD menu / select button...

  • Page 3: Bottom View

    Security lock slot — Attach a lock to secure your monitor. Barcode serial number label — Refer to this label if you need to contact Dell for technical support VESA mounting holes (100mm [Behind attached base plate]) — Use to mount the monitor.

  • Page 4: Pin Assignments

    * Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, DELL has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

  • Page 5: Plug And Play Capability

    (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user can select different settings, but in most cases monitor installation is automatic. General Model number 1707FP AIO For Dell™ OptiPlex™ USFF Flat Panel Screen type Active matrix - TFT LCD...

  • Page 6: Physical Characteristics

    Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) VESA, 720 x 400 31.5 70.0 28.3 VESA, 640 x 480 31.5 60.0 25.2 VESA, 640 x 480 37.5 75.0 31.5 VESA, 800 x 600 37.9 60.3 49.5 VESA, 800 x 600...

  • Page 7: Caring For Your Monitor

    Environmental Temperature: Operating 5° to 35°C (41° to 95°F) Nonoperating Storage: -20° to 60°C (-4° to 140°F) Shipping: -20° to 60°C(-4° to 140°F) Humidity: Operating 10% to 80% (noncondensing) Nonoperating Storage: 5% to 90% (noncondensing) Shipping: 5% to 90%(noncondensing) Altitude: Operating 3,657.6m (12,000 ft) max Nonoperating...

  • Page 8: Height Adjustment

    Back to Contents Page Using Your Adjustable Monitor Stand Dell™ 1707FP AIO Color Monitor For Dell™ OptiPlex™ USFF Computer Height Adjustment Tilt Adjustment Height Adjustment Stand extends vertically 90mm for viewing comfort. Tilt Adjustment Viewing angle can be adjusted 4 forward and 21 backwards for viewing comfort.
  • Page 9 Downloaded from ManualMonitor.com Manuals...

  • Page 10: Setting Up Your Monitor

    Back to Contents Page Setting Up Your Monitor Dell™ 1707FP AIO Color Monitor For Dell™ OptiPlex™ USFF Computer Cable Connections on the Back of the Monitor and the Computer Removing the Cable Cover and Cables from the Computer Detaching the Monitor from the Stand...
  • Page 11 3. Tighten the thumbscrews underneath the stand. 4. Connect the DVI cable to the computer. Route DVI cable as shown. NOTE: This cable is shipped attached to the monitor. Downloaded from ManualMonitor.com Manuals...
  • Page 12 5. Route the monitor power cable through the opening in the bottom of Cable Cover and connect it to the power cord receptacle on the back of the monitor NOTE: The monitor power cable and the cable cover are shipped with the monitor. 6.
  • Page 13 7. Connect the USB, keyboard and mouse cables to the computer as shown. a) Connect the short USB cable (shipped with monitor) ) to the upstream port of the monitor. Route this cable through the opening on the side of the cable cover. Connect the other end of USB cable to any computer USB down stream port.
  • Page 14 b) Connect the computer power cable to the computer power adaptor. c) Plug the power cables of the computer and the monitor into a nearby outlet. 9. (Optional) Install security lock to the cable cover. Power on both monitor and computer. If your monitor displays an image, installation is complete. If it does not display an image, see Troubleshooting.
  • Page 15 3. Push in the release button on the power cable before removing it from the computer. Detaching the Monitor from the Stand This monitor is VESA compliant for wall mounting, and detaching the monitor from the stand is necessary. Steps for removing the monitor from the stand: 1.

  • Page 16: Using The Front Panel Buttons

    Pick up the bottom of the stand. There are two metal tabs at the top of the VESA plate that insert into the monitor. Pull the bottom of the monitor away from the stand, being careful not to scratch the monitor with the stand. Using the Front Panel Buttons Downloaded from ManualMonitor.com Manuals Use the buttons on the front of the monitor to adjust the image settings.

  • Page 17: Using The Osd

    Use the Input Select button to select between two different video signals that may be connected to your monitor. NOTE: The floating 'Dell Self-test Feature Check' dialog appears on a black background if the monitor cannot sense a video signal. Depending upon the selected input, one of the dialogs shown below will scroll continually.
  • Page 18 saved if you change the settings and then wait for the OSD menu to disappear. 1. Push the MENU button to open the OSD system and display the main menu. Main Menu for Analog (VGA) Input Main Menu for Digital (DVI) Input NOTE: Positioning and Image settings are only available when you are using the Analog (VGA) connector.
  • Page 19 Push the + button to increase luminance and push the - button to decrease luminance (min 0 ~ max 100). Contrast adjusts the degree of difference between darkness and lightness on the monitor screen. Push the + button to increase the contrast and push the - button to decrease the contrast (min 0 ~ max 100). NOTE: When using DVI source, the contrast adjustment is not available.
  • Page 20 Image settings: The Phase and Pixel Clock adjustments allow you to more closely adjust your monitor to your preference. These settings are accessed through the main OSD menu, by selecting Image Settings. Pixel Clock Use the - and + buttons to make adjustments. (Minimum: 0 ~ Maximum: 100) (Coarse) If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (course) adjustment and then use Phase (fine), again.
  • Page 21 User Preset: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in single digit increments, User Preset from 0 to 100. OSD Settings: Adjust the settings for the OSD, including the location, the amount of time the menu remains on-screen, and the rotation of the OSD. Position of the OSD: Horizontal To adjust the horizontal position of the OSD, use the - and + buttons move OSD to the left and right.
  • Page 22 (optional) Yes — enables audio No — disables audio (default) NOTE: When the Dell Soundbar is not properly connected to the monitor, the audio menu is not available. Factory Reset: Reset the OSD menu options to the factory preset values.

  • Page 23: Setting The Optimal Resolution

    Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1280 X 1024 @ 60Hz. NOTE: The floating Dell Self-test Feature Check dialog appears on-screen if the monitor cannot sense a video signal. Occasionally, no warning message appears, but the screen is blank, this could also indicate that the monitor is not synchronizing with the computer.
  • Page 24 If you are using a non-Dell computer: Go to the support site for you computer and download the latest graphic drivers Go to your graphics card website and download the latest graphic drivers Using the Dell Soundbar (Optional) Attach mechanism...
  • Page 25 Insert the green stereo plug from the Soundbar in to your computer's audio output connector. NOTE: Soundbar Power Connector +12V DC output is for optional only. NOTICE: Do not use with any device other than Dell Soundbar . Back to Contents Page...

  • Page 26: Solving Problems

    (white connector) and the Analog(blue connector) cables from the back of computer. 3. Turn on the monitor. The floating 'Dell - Self-Test Feature Check' dialog box should appear on-screen (against a black background) if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains green.

  • Page 27: General Problems

    Analog Input 2.Digital Input Cannot Display This Video Mode Cannot Display This Video Mode This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use. See Monitor Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor.

  • Page 28: Product Specific Problems

    Perform monitor self-test feature check to determine if scrambled screen appears in self-test mode Check for bent or broken pins Boot up in the "safe mode" LCD Scratched Screen has scratches or Turn monitor off and clean the screen smudges For cleaning instruction, see Caring for Your Monitor.
  • Page 29 Soundbar is illuminated. (built-in DC power Confirm that the power cable from the Soundbar is plugged into the monitor. supply. i.e. 1707FP ) Confirm that the monitor has power. If the monitor has no power, see Troubleshooting your monitor monitor common problem.
  • Page 30 Back to Contents Page Appendix Dell™ 1707FP AIO Color Monitor For Dell™ OptiPlex™ USFF Computer CAUTION: Safety Instructions FCC Identification Information Contacting Dell Your Monitor Setup Guide CAUTION: Safety Instructions CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards.

  • Page 31: Fcc Identification Information

    Dell through the support number listed and your call will be routed appropriately. When you need to contact Dell, use the electronic addresses, telephone numbers, and codes provided in the following table. If you need assistance in determining which codes to use, contact a local or an international operator.
  • Page 32 0820 240 530 14 Preferred Accounts/Corporate Customer Care 0820 240 530 16 Support for XPS portable computers only 0820 240 530 81 Home/Small Business Support for all other Dell computers 0820 240 530 14 Preferred Accounts/Corporate Technical Support 0660 8779 Switchboard...
  • Page 33 Technical Support Fax 592 818 1350 Technical Support (Dell™ Dimension™ and Inspiron) toll-free: 800 858 2969 Technical Support (OptiPlex™, Latitude™, and Dell Precision™) toll-free: 800 858 0950 Technical Support (servers and storage) toll-free: 800 858 0960 Technical Support (projectors, PDAs, switches, routers, and so...
  • Page 34 (Montpellier) Home and Small Business International Access Code: Technical Support for XPS portable computers only 0825 387 129 Technical Support for all other Dell computers 0825 387 270 Country Code: 33 Customer Care 0825 823 833 City Codes: (1) (4)
  • Page 35 Website: support.ap.dell.com Technical Support E-mail: apsupport@dell.com International Access Code: Technical Support (Dimension and Inspiron) 2969 3188 Country Code: 852 Technical Support (OptiPlex, Latitude, and Dell Precision) 2969 3191 Technical Support (PowerApp™, PowerEdge™, PowerConnect™, 2969 3196 and PowerVault™) Customer Care 3416 0910...
  • Page 36 City Code: 44 Technical Support outside of Japan (Dimension and Inspiron) 81-44-520-1435 Technical Support (Dell Precision, OptiPlex, and Latitude) toll-free:0120-198-433 Technical Support outside of Japan (Dell Precision, OptiPlex, and 81-44-556-3894 Latitude) Technical Support (PDAs, projectors, printers, routers) toll-free: 0120-981-690 Technical Support outside of Japan (PDAs, projectors, printers,...
  • Page 37 Website: support.euro.dell.com (Amsterdam) Technical Support for Inspiron XPS computers only 020 674 45 94 International Access Code: Technical Support for all other Dell computers 020 674 45 00 Technical Support Fax 020 674 47 66 Country Code: 31 Home/Small Business Customer Care...
  • Page 38 Website: support.ap.dell.com Technical Support (Dimension, Inspiron, and Electronics and toll-free: 1800 394 7430 International Access Code: Accessories) Technical Support (OptiPlex, Latitude, and Dell Precision) toll-free: 1800 394 7488 Country Code: 65 Technical Support (PowerApp, PowerEdge, PowerConnect, and toll-free: 1800 394 7478...
  • Page 39 E-mail: Tech_support_central_Europe@dell.com International Access Code: Technical Support for XPS portable computers only 0848 33 88 57 Country Code: 41 Technical Support (Home and Small Business) for all other Dell 0844 811 411 products City Code: 22 Technical Support (Corporate) 0844 822 844...
  • Page 40 International Access Code: Country Code: 1 Hardware and Warranty Support (Dell TV, Printers, and toll-free1-877-459-7298 Projectors) for Relationship customers Consumer (Home and Home Office) Support for all other Dell toll-free: 1-800-624-9896 products Customer Service toll-free: 1-800-624-9897 DellNet™ Service and Support...
  • Page 41 Downloaded from ManualMonitor.com Manuals...
  • Page 42 Downloaded from ManualMonitor.com Manuals...
  • Page 43 Downloaded from ManualMonitor.com Manuals...
  • Page 44 Downloaded from ManualMonitor.com Manuals...
  • Page 45 Downloaded from ManualMonitor.com Manuals...

Table of Contents