Table of Contents
Advertisement
(2) Stopping or interrupting playback
Gently lift the lifter lever.
1
• The tone arm rises and the stylus lifts off the record.
Hold the head shell's finger support and move the
2
tone arm back onto the arm rest.
3
Secure the tone arm on the arm rest.
Press the START/STOP button.
• The platter stops turning.
• When the BRAKE button's LED is lit, rotation stops
4
slowly (in about 2 seconds).
• When the BRAKE button is flashing, internal electronic
brake is set free.
6 TROUBLESHOOTING
Make sure of the followings before you consider as any malfunctions:
1. Are all the connections correct ?
2. Is the set being operated correctly in accordance with the operating instructions:
3. Are the speakers and amplifiers functioning correctly ?
If the turntable system still does not function properly, check it again, using the check list below. If the symptom does not correspond to the
check list, please contact your DENON dealer.
Symptoms
Stylus does not lower onto record.
No sound is produced.
Booming sound is heard.
Stylus skips.
Arm stops halfway across the record.
Sound is too weak or too strong.
7 MAIN SPECIFICATIONS
2 Turntable
Drive method:
Direct drive
Turning speed:
33 1/3, 45 and 78 rpm
Wow/flutter:
0.2 % wrms or less
S/N ratio:
50 dB or greater
Platter:
Aluminum die-cast, 330 mm diameter
Motor:
Brush less DC motor
2 Tone arm
Arm type:
Static balance, S-shaped arm pipe
Effective length:
234 mm
• Is the stylus pressure properly adjusted ?
• Is the arm's horizontal balance properly adjusted ?
• Are the cartridge and head shell properly connected ?
• Are the output cords properly connected to the amplifier ?
• Are the amplifier's adjustments and settings correct ?
• Is the ground wire on the output cord connected ?
• Are the output cord's plugs securely connected ?
• Is the head shell's lock nut securely tightened ?
• Is the stylus pressure properly adjusted ?
• Is the record warped or scratched ?
• Is there dust on the stylus ?
• Is the record scratched ?
• Is the arm hitting some object ?
• Is the amplifier's connection selector (MC or MM) set to the proper
setting for the type (output) of the cartridge being used ?
2 General
NOTES:
• Do not subject the turntable to vibrations or shocks while a
record is playing.
• Wait until the platter stops turning before replacing records.
• Do not force the platter to stop moving while the motor is
engaged. Quality slip mats should be used to hold records
in position. Forcing the motor to stop can damage the
motor assembly.
Check
Overhang:
15 mm
Arm height adjustment
range:
Approx. 6 mm
Stylus pressure adjustment
range:
0 to 4.0 g (1 scale = 0.1 g)
Applicable cartridge
weight:
6 to 10 g
Power supply:
AC 115/230 V, 50/60 Hz
Power consumption: 15 W
Dimensions:
448 (W) x 156 (H) x 350 (D) mm
17-1/4 (W) x 6-9/64 (H) x
13-25/32 (D) in.
Weight:
Approx. 12 kg (26.0 lbs)
ENGLISH
See page
7, 8
7, 8
6
8
–
8
–
6
7, 8
–
–
–
–
–
9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DP-DJ151 and is the answer not in the manual?
Questions and answers