Master Programming Mode Chart - Pentair FLECK 5600SXT Service Manual

MASTER PROGRAMMING MODE CHART

Before entering Master Programming, please contact your local professional water dealer. To enter
CAUTION
Master Programming, set time to 12:01 PM.
Abbreviation
DF Display Format
VT
CT
NT Number of Tanks
TS Tank in Service
C
H Feedwater Hardness
Reserve Selection
RS
SF
RC Fixed Reserve Capacity
DO
RT
Regen Cycle Step
BW, BD, RR, BF
D1, D2, D3, D4, D5,
Day of Week Settings
D6, & D7
CD
FM Flow Meter Type
K Meter Pulse Setting
NOTE: Some items may not be shown depending on timer configuration. The timer will discard any changes
and exit Master Programming Mode if any button is not pressed for sixty seconds.
6 • FLECK
5600SXT Downflow Service Manual
Master Programming Options
Parameter Option
Abbreviation
GAL
dF1b
dF2b
Fltr
Valve Type
UFbd
UFtr
Othr
Control Type
dAY
Unit Capacity
Safety Factor
Day Override
Regen Time
Times
Current Day
t0.7
P0.7
t1.0
P1.0
t1.5
P1.5
P2.0
Gen
Gallons
Ltr Liters
Downflow/Upflow Single Backwash
Downflow Double Backwash
Filter
Upflow Brine First
Upflow Filter
Other
Fd Meter (Flow) Delayed
FI Meter (Flow) Immediate
tc Time Clock
Day of Week
1 Single Tank System
2 Two Tank System
U1 Tank 1 in Service
U2 Tank 2 in Service
Unit Capacity (Grains)
Hardness of Inlet Water
SF Percentage Safety Factor
rc Fixed Reserve Capacity
Percentage of the system capacity to be used as a reserve
Fixed volume to be used as a reserve
The system's day override setting
The time of day the system will regenerate
The time duration for each regeneration step. Adjustable from
OFF and 0-199 minutes.
NOTE: If "Othr" is chosen under "Valve Type", then R1, R2, R3,
etc, will be displayed instead
Regeneration setting (On or OFF) for each day of the week on
day-of-week systems
The Current day of the week
3/4-inch Turbine Meter
3/4-inch Paddle Wheel Meter
1-inch Turbine Meter
1-inch Paddle Wheel Meter
1.5-inch Turbine Meter
1.5-inch Paddle Wheel Meter
2-inch Paddle Wheel Meter
Generic or Other Meter
Meter pulses per gallon for generic/other flow meter
Options