Sharp VN-EZ1U Service Manual page 7

VN-EZl U
4-1. CAUTION ON ASSEMBLY
I. Caution for wiring treatment of rear cabinet
l
Check whether the flexible and lead lines framed with ()
in the left figure swell out or not.
Fig. 1. Rear cabinet (Whole)
Tripod base holder
2.
Cauti
Fig. 2. Rear cabinet (Bottom)
l
Check whether the insulation tape is peeled off on the base
holder of the tripod framed with (-) in the left figure or
not.
l
Take care to prevent the rear cabinet framed with ()
in the left figure from being outside the front cabinet.
Fig. 3. Rear cabinet (Side face)
l
Take care to insert the projection of the front cabinet
framed with (-) in the left
figure into the area (~ in
the
figure below) between the rear cabinet and tripod base
holder.
Tripod base holder
Fig. 5. Rear cabinet (Bottom)
4-2