Table of Contents
Advertisement
The PAT2 (Power Analyser Transfer 2) data export software supplied with the device is used to transfer the data recorded in the
device to a PC.
To install it, load the installation CD in the CD drive of your PC, then follow the instructions on screen.
Then connect the device to the PC using the USB cord supplied, after removing the cover that protects the USB port on the device.
Switch the device on by pressing the
The PAT2 transfer software automatically defines the communication rate between the PC and the device.
Note: All measurements recorded in the device can be transferred to the PC via the USB link, using the PAT2 program. The transfer
does not erase the recorded data unless the user explicitly asks it to.
The data stored in the memory card can also be read on a PC, using an SD card reader and the PAT2 program. For an
explanation of how to withdraw the memory card, refer to §17.5.
For directions for using the data export software, use its Help function or refer to its user manual.
13. DATA EXPORT SOFTWARE
C.A 8336
POWER & QUALITY ANALYSER
?
+
QUALI
STAR
key and wait for your PC to detect it.
78
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the C.A 8336 and is the answer not in the manual?
Questions and answers