Let The Modem Router Automatically Update Its Firmware - NETGEAR D6220 User Manual

A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. In the upper right corner, select a language from the menu.
5. When prompted, click the OK button to confirm this change.
The page refreshes with the language that you selected.

Let the Modem Router Automatically Update Its Firmware

When you set up your modem router and are connected to the Internet, the modem router automatically
checks for you to see if newer firmware is available. If it is, a message is displayed at the top of the page.
For information about manually updating firmware, see
193.
To let the modem router automatically update its firmware:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Wait for the modem router to determine if newer firmware is available.
This process might take a few minutes. If the modem router detects new firmware, the modem router
displays a message at the top of the page.
5. Click the message.
6. To update the modem router with the latest firmware, click the Yes button.
After the update, the modem router restarts.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the update. For
example, do not close the browser, click a link, or load a new page. Do not
turn off the modem router. Wait until the modem router finishes restarting and
the Power LED turns solid green.
AC1200 WiFi VDSL/ADSL Modem Router Model D6220
Install and Access the Modem Router and Its Network
Update the Firmware of the Modem Router
33
on page