Sapling SAP Series Installation Manual

Sapling SAP Series Installation Manual

Ip clock

Advertisement

Quick Links

Installation Manual V6.7
SAP Series IP Clock
Current as of April 2016
The Sapling Company, Inc.
P. (+1) 215.322.6063
1633 Republic Road
F. (+1) 215.322.8498
Huntingdon Valley, PA 19006
www.sapling-inc.com
USA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SAP Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Sapling SAP Series

  • Page 1 Installation Manual V6.7 SAP Series IP Clock The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Current as of April 2016...
  • Page 2: Table Of Contents

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com SAP Series IP Clocks Table of Contents Table of Contents Web Interface Important Safety Instructions - Log In Identify Your Clock - Date and Time...
  • Page 3: Important Safety Instructions

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Important Safety Instructions DANGER WARNING SHOCK HAZARD FIRE HAZARD • Keep the electricity to this device turned • Always follow your national and regional OFF until the clock installation electrical codes or ordinances.
  • Page 4: Identify Your Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Identify Your Clock A label containing the part number of your clock is attached to the clock movement. If your part number begins with SAP-1, you own a METAL clock...
  • Page 5: Preparing To Install - System/Network Requirements

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Preparing to Install - System/Network Requirements To be able to set up an IP-based synchronized clock network, you will need the following items: •...
  • Page 6: Power Over Ethernet (Poe)

    “Power Class” back to the power source, which is useful for system-wide power management or monitoring purposes. Sapling’s IP Analog Clocks are highly efficient products and consume only 2.5 watts of power during normal operation. This power level corresponds to the IEEE802.3af designation of “Class 1”, which is a power usage...
  • Page 7: Preparing To Install - Ip Monitor Software

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Preparing to Install - IP Monitor Software 1) Create a folder on your computer called IP Monitor 2) If you have the IP Monitor on a CD: a) Load the CD into your computer’s CD Drive...
  • Page 8: Dhcp

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Preparing to Install - DHCP If you are accessing an Internet NTP server, Port 123 must be open. If you wish to be able to access the web interface from a computer that is not on the same subnet, Port 80 must be open.
  • Page 9: Static Ip

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Preparing to Install - Static IP If you are accessing an Internet NTP server, Port 123 must be open. If you wish to be able to access the web interface from a computer that is not on the network, Port 80 must be open.
  • Page 10: Static Ip

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Preparing to Install - Static IP (ctd.) 5) Next to “Gateway IP Address”, set an appropriate IP address. The address you enter should be supplied by your network administrator.
  • Page 11: Quick Start

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Preparing to Install - Quick Start 1) Double click on the serial number for the clock being installed. This should take you to the web interface for that clock.
  • Page 12: Quick Start

    3) Select the Network Servers tab and confirm that the NTP servers listed are the servers you wish to use. If you wish, enter the URL or IP address of an NTP server or Sapling master clock of your preference. If using a Sapling master clock, and the master clock must be set to a static IP address, see the master clock manual for instructions on how to set the master clock to a static IP address.
  • Page 13: Wall Mount Installation - Round Metal Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Metal Clock Included in Package Description Quantity Picture SAP round original analog clock Mounting Bracket 12”: M-MB-12-4 16”: M-MB-16-2...
  • Page 14 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Metal Clock 1) Install the single gang box in the wall. Leave at 2) Run a CAT5 or CAT6 patch cable from a PoE least 17 inches between the bottom of the gang switch or PoE injector to the gang box.
  • Page 15 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Metal Clock 6) Remove the gearbox pin, then attach the 5) Insert the wall anchor into the hole, then reattach patch cable to the port on the right side of the the mounting bracket.
  • Page 16: Round Slimline Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock Included in Package Description Quantity Picture SAP round SlimLine analog clock Included in Wiring Kit (A-SLM-MK-S-1)
  • Page 17 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock 1) If you are installing a new gang box in the wall, 2) Run a CAT5 or CAT6 patch cable from a PoE leave at least 4 inches between the top of the gang switch or PoE injector to the gang box.
  • Page 18 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock 4C) Insert the wall anchors into the two holes, 4B) Use a pencil to mark the positions of the top...
  • Page 19: Round Slimline Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round SlimLine Clock 8) Attach the clock to the mounting piece by sliding 7) Lay any excess wiring across the strain relief base, the clock back onto it.
  • Page 20: Round Aluminum/Wood Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock Included in Package Description Quantity Picture SAP round SlimLine analog clock with aluminum/wood rim...
  • Page 21 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock 1) Install the single gang box in the wall. Leave at 2) Run a CAT5 or CAT6 patch cable from a PoE least 4 inches between the top of the gang box and switch or PoE injector to the gang box.
  • Page 22 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock 5A 5B 5A) If you do not wish to attach the mounting piece...
  • Page 23 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock 7) Temporarily attach the clock to the mounting 8) Remove the gearbox pin, then attach the patch piece (see step 9), use the pencil to mark the cable to the port on the right side of the movement.
  • Page 24 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Round Aluminum or Wood Clock 11) Place one of the self-tapping screws through the 12) If you need to take the clock off the wall after hole in the top of the release lever.
  • Page 25 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock Included in Package Description Quantity Picture SAP square analog clock Mounting Piece (already attached to clock housing)
  • Page 26 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock 1) Install the single gang box in the wall. Leave at 2) Run a CAT5 or CAT6 patch cable from a PoE least 4 inches between the top of the gang box and switch or PoE injector to the gang box.
  • Page 27 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock 5) Thread the patch cable through the hole at the 6) Attach the mounting piece to the gang box using...
  • Page 28 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Wall Mount Installation - Square Clock 9) Remove the gearbox pin, then attach the 10) Loosen the strain relief by unscrewing the two patch cable to the port on the right side of the screws.
  • Page 29: Flag Mount Installation - Round Metal Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Metal Clock Included in Package Description Quantity Picture SAP square analog clock Mounting Bracket (not used) Included in Wiring Kit (A-MK-QS-1E)
  • Page 30 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Metal Clock Included in Adapter Kit (A-MOUNT-12S-2) or (A-MOUNT-16S-2) Description Quantity Picture Round Clock Adapter Internal-tooth washer...
  • Page 31 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Metal Clock 1) Install the double gang box in the wall or ceiling. 2) Run a CAT5 or CAT6 patch cable from a PoE If you are installing the gang box in the wall, leave switch or PoE injector to the gang box.
  • Page 32 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Metal Clock 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced.
  • Page 33 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Metal Clock 9) Insert the four #8-32x7/16 screws through the 10) Thread at least fifteen inches (38.1cm) of wiring...
  • Page 34: Flag Mount Installation - Round Metal Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round Metal Clock 12) Remove the gearbox pin, then attach the 13) Remove the outer adapter screws, then slide the...
  • Page 35 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum/Wood Clock Included in Package Description Quantity Picture SAP round SlimLine analog clock Included in Pole Kit (SAB-4BD-00S-0 or SAB-1BD-00S-0) Dual-mount pole, including mounting plate.
  • Page 36: Round Slimline/Aluminum Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock Included in Mounting Kit (A-SLM-MK-S-1) or (A-SLM-MK-AW) Description Quantity Picture Mounting Piece (not used) Release lever...
  • Page 37 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock 1) Install the double gang box in the wall or ceiling. 2) Run a CAT5 or CAT6 patch cable from a PoE If you are installing the gang box in the wall, leave switch or PoE injector to the gang box.
  • Page 38 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced.
  • Page 39 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Round SlimLine/Aluminum Clock 9 10 9) Insert the four #8-32x7/16 screws through the 10) Thread at least fifteen inches (38.1cm) of wiring...
  • Page 40: Round Slimline/Aluminum Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com 12 13 Flag Mount Installation - Round SlimLine/Aluminum Clock 13) Lay any excess wiring across the strain relief 12) Remove the gearbox pin, then attach...
  • Page 41: Square Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock Included in Package Description Quantity Picture SAP square analog clock Included in Pole Kit (SAB-4GD-00S-0 or SAB-1GD-00S-0) Dual-mount pole, including mounting plate.
  • Page 42 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock 1) Install the double gang box in the wall or ceiling. 2) Run a CAT5 or CAT6 patch cable from a PoE If you are installing the gang box in the wall, leave switch or PoE injector to the gang box.
  • Page 43 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced.
  • Page 44 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock 9 10 9) Release the mounting piece from the back of 10) Attach the clock housing to the pole using four...
  • Page 45 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock 12) Attach the base of the pole to the mounting plate, so that the lip is on the top of the base, and the holes for the screws are on the bottom of the base.
  • Page 46: Square Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Flag Mount Installation - Square Clock 15) Rotate the clock so that it is right-side up. Slide the clock back into its housing. You should hear a snapping noise as the latches reengage.
  • Page 47: Double Mount Installation - Round Metal Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round Metal Clock Included in Package Description Quantity Picture SAP round analog clock Mounting Bracket (not used) Included in Double Mount Kit (SAB-4BD-12R-0 or SAB-4BD-16R-0)
  • Page 48 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round Metal Clock 1) Install the double gang box in the wall or ceiling. 2) Run a CAT5 or CAT6 patch cable from a PoE If you are installing the gang box in the wall, leave switch or PoE injector to the gang box.
  • Page 49 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round Metal Clock 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced.
  • Page 50 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round Metal Clock 9) Attach the base of the pole to the mounting plate so that the lip is on the top of the base, and the holes for the screws are on the bottom of the base.
  • Page 51 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round Metal Clock 11) Remove the outer adapter screws, then slide each clock onto the adapter in the rotation that you wish it to be viewed.
  • Page 52: Round Slimline/Aluminum Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock Included in Package Description Quantity Picture SAP round SlimLine analog clock Included in Double Mount Kit (SAH-4BD-12R-0 or SAH-4BD-16R-0)
  • Page 53 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock Description Quantity Picture Included in Wiring Kit (A-WK-MTG-1) (not used) #8x1.5 Self-tapping screw (not used)
  • Page 54 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock 1) Install the double gang box in the wall or ceiling. 2) Run a CAT5 or CAT6 patch cable from a PoE If you are installing the gang box in the wall, leave switch or PoE injector to the gang box.
  • Page 55 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced.
  • Page 56 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Round SlimLine/Aluminum Clock 9) Attach the base of the pole to the mounting plate so that the lip is on the top of the base, and the holes for the screws are on the bottom of the base.
  • Page 57 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com 11 12 Double Mount Installation - Round SlimLine/Aluminum Clock 11) For each clock, lay any excess wiring across the 12) Slide each clock onto the adapter in the rotation strain relief base, then attach the strain relief to the that you wish it to be viewed.
  • Page 58 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock Included in Package Description Quantity Picture SAP square analog clock Mounting Piece-already attached (not used) to clock housing...
  • Page 59 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock Description Quantity Picture Included in Wiring Kit (A-WK-MTG-1) (not used) #8x1.5 Self-tapping screw (not used) Wall anchor...
  • Page 60 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock 1) Install the double gang box in the wall or ceiling. 2) Run a CAT5 or CAT6 patch cable from a PoE If you are installing the gang box in the wall, leave switch or PoE injector to the gang box.
  • Page 61 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock 5) Remove the mounting plate and drill the four 6) Reattach the mounting plate, this time using all holes that were just traced.
  • Page 62 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock 9 10 9) Release the mounting piece from the back of 10) Attach both housings to the pole using four...
  • Page 63 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock 13) Attach the base of the pole to the mounting plate, so that the lip is on the top of the base, and the holes for the screws are on the bottom of the base.
  • Page 64: Square Clock

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Double Mount Installation - Square Clock 15) For each clock, loosen the strain relief by unscrewing the two screws. Slip any excess wiring through them, then tighten the strain relief by reinserting and tightening the screws.
  • Page 65: Ip Monitor Software - Main Screen

    S y n c h r o n i z e d C l o c k S y s t e m s 1. Device List - Displays all of the Sapling IP devices that are active in the system. The monitor screen displays the name of the clock, serial number, type of clock, IP address, last updated time, how long the clock has been running, the clock’s MAC address, and the status of the clock.
  • Page 66: Task Bar Options

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com IP Monitor Software - Task Bar Options S y n c h r o n i z e d C l o c k S y s t e m s 1.
  • Page 67 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com IP Monitor Software - Task Bar Options S y n c h r o n i z e d C l o c k S y s t e m s 3.
  • Page 68: Task Bar Options

    7. Version - When clicked, this button will display version number information of the IP Monitor Software and the Software Version Number (SVN). This information is needed only when contacting Sapling technical support and will not affect your usage of the IP Monitor Software.
  • Page 69 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com IP Monitor Software - Quick Access Menu IP Monitor Software - Task Bar Options S y n c h r o n i z e d C l o c k S y s t e m s...
  • Page 70: Error Messages

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com IP Monitor Software - Error messages S y n c h r o n i z e d C l o c k S y s t e m s 1.
  • Page 71: Web Interface

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Log In 1. Password - Location where the password is entered. The default password is 6063, but this can be changed within the settings.
  • Page 72: Clock Settings

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Clock Settings S y n c h r o n i z e d C l o c k S y s t e m s 1.
  • Page 73: Clock Settings

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Clock Settings S y n c h r o n i z e d C l o c k S y s t e m s 9.
  • Page 74: Network Settings

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Network Settings S y n c h r o n i z e d C l o c k S y s t e m s 1.
  • Page 75: Network Servers

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Network Servers 1. Retry Failed Server After - This field will allow the user to set how often the clock will attempt to contact a NTP server that has failed to communicate time data to the clock.
  • Page 76: Clock Status

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Clock Status S y n c h r o n i z e d C l o c k S y s t e m s 1.
  • Page 77 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Daylight Saving Time 1. Method for Defining DST - There are four methods for defining Daylight Saving Time. The method can be selected from the drop-down menu.
  • Page 78: Email Alerts

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Email Alerts S y n c h r o n i z e d C l o c k S y s t e m s 1.
  • Page 79 The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Web Interface - Log 1. Clear Log - When clicked, this button deletes all of the information on the Log page.
  • Page 80: Frequently Asked Questions

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Frequently Asked Questions What size utility/gang box is needed? A standard single gang box is required for wall mounting a locally powered version of the clock.
  • Page 81: Troubleshooting

    The Sapling Company, Inc. P. (+1) 215.322.6063 1633 Republic Road F. (+1) 215.322.8498 Huntingdon Valley, PA 19006 www.sapling-inc.com Troubleshooting The clock is not powering up. What should I do? If you are using a power injector or PoE switch, confirm that the injector or switch is powered. If you can...
  • Page 82: Warranty

    Sapling Limited Warranty and Disclaimer The Sapling Company, Inc. warrants only that at the time of delivery and for a period of 24 calendar months after delivery or the period stated in this invoice, if different, the Goods shall be free of defects in workmanship and materials, PROVIDED that this warranty shall not apply: To damage caused by Buyer’s or any third party’s act, default or misuse of the Goods or by failure to follow...

Table of Contents