Description (Fig. 1) - DeWalt DW621 Instruction Manual

Plunge 2 hp router

Hide thumbs Also See for DW621:

User manual

Instructions manual (132 pages)

Original instructions manual (96 pages)

Table Of Contents

Table of Contents

Available languages

Enlarged version

as those dust masks that are specially designed to filter out microscopic

particles.

• Avoid prolonged contact with dust from power sanding,

sawing, grinding, drilling, and other construction activities.

Wear protective clothing and wash exposed areas with soap

and water. Allowing dust to get into your mouth, eyes, or lay on the

skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disburse dust, which

may cause serious and permanent respiratory or other injury. Always

use NIOSH/OSHA approved respiratory protection appropriate for the

dust exposure. Direct particles away from face and body.

WARNING: ALWAYS USE SAFETY GLASSES. Everyday eyeglasses

are NOT safety glasses. Also use face or dust mask if cutting operation

is dusty. ALL USERS AND BYSTANDERS MUST ALWAYS WEAR

CERTIFIED SAFETY EQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CSA Z94.3),

• ANSI S12.6 (S3.19) hearing protection,

• NIOSH/OSHA/MSHA respiratory protection.

• The label on your tool may include the following symbols. The

symbols and their definitions are as follows:

V ................... volts

Hz ................. hertz

min ............... minutes

or DC ... direct current

................. Class I Construction

(grounded)

................. Class II Construction

(double insulated)

.../min .......... revolutions per minute .......................speed

BPM ............. beats per minute

IPM ............... impacts per minute

SPM ............. strokes per minute

A ......................amperes

W .....................watts

or AC ..........alternating

current

or AC/DC ...alternating

........................or direct

current

n o ....................no load

n ......................rated

........................speed

.....................earthing

sfpm ............. surface feet

.....................

per minute

.....................