Charging Big Blue Party; Setting Up Big Blue Party On A Network - Brookstone BIG BLUE PARTY Manual

CHARGING BIG BLUE PARTY

1. Lift the RUBBER COVER and connect the ADAPTER's jack to the DC IN
PORT on the Big Blue Party.
2. Plug the ADAPTER into an electrical outlet.
3. The CHARGING LED INDICATOR is RED while the Big Blue Party is charging.
When the Big Blue Party is fully charged, the CHARGING LED INDICATOR
turns off. For first time use, charge Big Blue Party for at least 5 hours.
4. When Big Blue Party's battery is low, the CHARGING LED INDICATOR
will flash RED.
8

SETTING UP BIG BLUE PARTY ON A NETWORK

DOWNLOADING GOOGLE HOME APP
Go to the iTunes App Store (for Apple devices) or Google Play
® SM
devices) to download the Google Home App.
CONNECTING BIG BLUE PARTY TO A NETWORK
1. Ensure the Big Blue Party is fully charged or connect the adapter's jack
to the DC IN PORT on the back of Big Blue Party and plug the adapter into an
electrical outlet.
2. Press the POWER BUTTON. The LED ring will turn on.
3. When the Big Blue Party is powered on, the WI-FI STATUS LED INDICATOR
is solid red for several seconds then changes to flashing white for several
seconds while the Big Blue Party is booting up. The WI-FI STATUS LED
INDICATOR may turn on and off during the booting up process, this is normal.
The booting process may take up to one minute to complete.
4. After booting is complete, the WI-FI STATUS LED INDICATOR continuously
flashes white, indicating the Big Blue Party is ready to be connected to a Wi-Fi
network through the Google Home app.
5. Ensure your device (e.g., smartphone) is connected to a Wi-Fi network. The
Wi-Fi network will also be used to pair the Big Blue Party with the Google
Home app.
6. Ensure Bluetooth ® is enabled on your device (e.g., smartphone). During set up,
the Google Home app needs to access your device (e.g., smartphone) using
Bluetooth .
®
(for Android
TM ®
9