Predator 63022 Owner's Manual & Safety Instructions

2 hp 52 cc gasoline auger powerhead with 6'' bit

Hide thumbs

Table Of Contents

Quick Links

Owner's Manual & Safety Instructions

Save This Manual

operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

Using an engine indoors

CAN KILL YOU IN MINUTES.

Engine exhaust contains carbon monoxide.

This is a poison you cannot see or smell.

NEVER use inside

a home or garage,

EVEN IF doors and

windows are open.

Visit our website at: http://www.harborfreight.com

Email our technical support at: productsupport@harborfreight.com

Email our engine support at: predator@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2015 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Keep this manual for the safety warnings and precautions, assembly,

Only use OUTSIDE

and far away from

windows, doors,

and vents.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

REV 16d

Table of Contents

Need help?

Do you have a question about the 63022 and is the answer not in the manual?

Questions and answers

Anthony

April 25, 2025

#54 muffler protection cover,how to purchase

Summary of Contents for Predator 63022

Page 1 Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com Email our engine support at: predator@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Page 2: Table Of Contents
2700 RPM The emissions control system for this Engine is warranted for standards set by the U.S. Environmental Protection Agency. For warranty information, refer to the last pages of this manual. Page 2 For technical questions, please call 1-888-866-5797. ITEM 63022...
Page 3: Safety
Specifications chart of this manual. start fires around dry vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements. ITEM 63022 For technical questions, please call 1-888-866-5797. Page 3...
Page 4 Auger must be turned off immediately. Auger. Do not use while tired or under the 12. Do not use the Auger if the Bit influence of drugs, alcohol or medication. is dull, bent, or damaged. Page 4 For technical questions, please call 1-888-866-5797. ITEM 63022...
Page 5 (such as tingling, numbness, and white or blue 6. To reduce vibration, maintain the tool as explained in this manual. If any abnormal fingers), seek medical advice as soon as possible. vibration occurs, stop use immediately. ITEM 63022 For technical questions, please call 1-888-866-5797. Page 5...
Page 6 Harbor Freight Tools for a replacement. to evaporate before starting engine. To prevent FIRE, do not start the engine while the smell of fuel hangs in the air. SAVE THESE INSTRUCTIONS. Page 6 For technical questions, please call 1-888-866-5797. ITEM 63022...
Page 7: Setup
Follow fuel stabilizer manufacturer’s low or no fuel mix, will permanently damage the unit. recommendations for use. Running the Engine without treating the gasoline with fuel stabilizer will permanently damage the unit. ITEM 63022 For technical questions, please call 1-888-866-5797. Page 7...
Page 8 Components and Controls Fuel Tank Starter Handle Throttle Handle Choke power Switch Page 8 For technical questions, please call 1-888-866-5797. ITEM 63022...
Page 9: Operation
1. Insert the shank of the Bit fully upward into the 2. Secure the Bit in the Transmission Transmission Socket on the bottom of the Auger. Socket, using the Pin and R-Pin. ITEM 63022 For technical questions, please call 1-888-866-5797. Page 9...
Page 10 Allow Cable to retract fully and then pull it quickly. Repeat until the engine starts. Note: Do not let the Starter Handle snap back against the engine. Hold it as it recoils so it doesn’t hit the engine. Page 10 For technical questions, please call 1-888-866-5797. ITEM 63022...
Page 11 9. Accelerate the Engine to full throttle just before starting to drill by squeezing the Throttle. Keep the Engine at full throttle the entire time you are drilling, unless a problem arises. ITEM 63022 For technical questions, please call 1-888-866-5797. Page 11...
Page 12: Maintenance
2. Clean carbon build-up from combustion chamber Replace Fuel Filter (84) and Fuel Cap Set (94) Service more frequently when used in dusty areas. These items should be serviced by a qualified technician. Page 12 For technical questions, please call 1-888-866-5797. ITEM 63022...
Page 13 5. Wipe off the Air Cleaner Case (73). 6. Install the cleaned filter in reverse order of removal. Secure the Air Cleaner Cover before use. ITEM 63022 For technical questions, please call 1-888-866-5797. Page 13...
Page 14 To prevent FIRE, do not start the Engine then tighten about 1/16 turn more. while the smell of fuel hangs in the air. Page 14 For technical questions, please call 1-888-866-5797. ITEM 63022...
Page 15 Remove spark plug and pour one tablespoon of fuel stabilizer’s recommended time period, engine oil into cylinder through spark plug hole. or if the Engine does not start. ITEM 63022 For technical questions, please call 1-888-866-5797. Page 15...
Page 16: Troubleshooting
Engine to stop Engine. Discontinue using Auger until the tool is repaired by a qualified service technician. Follow all safety precautions whenever diagnosing or servicing the Auger or engine. Page 16 For technical questions, please call 1-888-866-5797. ITEM 63022...
Page 17 Auger will not operate Follow all safety precautions whenever diagnosing or servicing the Auger or engine. ITEM 63022 For technical questions, please call 1-888-866-5797. Page 17...
Page 18: Warranties
(2) year term of this warranty at no cost to you, including diagnosis, parts and labor. This warranty applies to the original purchaser and any subsequent owner within the two year warranty period. Page 18 For technical questions, please call 1-888-866-5797. ITEM 63022...
Page 19 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. ITEM 63022 For technical questions, please call 1-888-866-5797. Page 19...
Page 20: Parts Lists And Diagrams
Note: Some parts are listed and shown for illustration purposes only, and are not available Note: If product has no serial number, individually as replacement parts. record month and year of purchase instead. Page 20 For technical questions, please call 1-888-866-5797. ITEM 63022...
Page 21 Engine Assembly Diagram ITEM 63022 For technical questions, please call 1-888-866-5797. Page 21...
Page 22 Jump Ring Gear 6" Auger Bit Jump Ring Safety Pin Gear Hex Wrenches Bearing Open End Wrench Jump Ring Spark Plug Socket Bearing Standard Screwdriver Gear Box Oil Mixing Container Screw Page 22 For technical questions, please call 1-888-866-5797. ITEM 63022...
Page 23 Auger Diagram 30a 31a ITEM 63022 For technical questions, please call 1-888-866-5797. Page 23...
Page 24 3491 Mission Oaks Blvd. • pO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797...