WWAN card
Removing WWAN card
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
NOTE:
3
To remove the WWAN card:
a
Remove the M2.0 x 3.0 screw that secures the metal bracket to the WWAN card [1].
b Lift the metal bracket that secures the WWAN card [2].
c
Disconnect the WWAN cables from the connectors on the WWAN card [3].
d Lift the WWAN card from the computer [4].
Installing WWAN card
1
Insert the WWAN card into the connector on the system board.
2
Connect the WWAN cables to the connectors on the WWAN card.
3
Place the metal bracket and tighten the M2.0 x 3.0 screw to secure it to the computer.
4
Install the:
16
Removing and installing components
Before working inside your
You need not remove the battery but instead disconnect the battery cable from the system board.
computer.
Need help?
Do you have a question about the Latitude 7280 and is the answer not in the manual?
Questions and answers