Factory Reset - Philips PS27FHDER User Manual

4. Advanced operation
OSD Position
Info
OSD Timeout
OSD Lock

Factory Reset

Image
DVI1 5V
DVI2 5V
Settings
5V Output
Image 4-9
To temporarily unlock and enter the OSD
Press and hold both the
OSD has been unlocked for about 20 sec.
4.9 Factory reset
About the factory reset
The factory reset option allows to reset all OSD menu settings to its default settings. The default settings
are described below.
Image menu:
• Image source: DVI1
• Aspect ratio: Aspect
• Color temperature: Calibrated
• Display function: CAL. DICOM
Settings menu:
• OSD menu position: Bottom right
• OSD menu time-out: 15 sec.
• OSD lock: On
• Power (5V) over DVI1: PIN 14 ON
• Power (5V) over DVI2: PIN 14 ON
• +5 VDC power output: On
Brightness setting: 100%
To reset the OSD menu settings
1. Bring up the OSD main menu.
2. Navigate to the Settings menu.
3. Select Factory reset.
16
Center
240 sec.
Off
Off
Off
Off
and keys for approximately 3 seconds, until a pop up warns you that the
K5902101 (451920611531) PS27FHDER 21/05/2015