Table of Contents
Advertisement
Installing the software
The procedures for installing the necessary software are
explained.
• The installation procedure varies depending on the version
Caution
• If you are using Windows 2000 or Windows XP
• Either "430RS" or "330RS" will be displayed in the installa-
Installing the USB driver (Windows 98/98SE/Me/2000)
z
x
c
v
88
of Windows (98/98SE/Me/2000). Before starting installa-
tion, check which version of Windows you have on your
PC. If you are using Windows XP, see "Installing the USB
Driver (Windows XP)" (p.95) for installation instructions.
(Professional), log in by the administrator before starting
installation. Refer to your PC's operation manual for
instructions on how to log in.
tion screen area where "xxxxx" is displayed.
Turn on your PC.
Set the included CD-ROM (S-SW5) in the CD-ROM drive.
Turn the camera off, and connect the PC and camera
using an USB cable.
Turn the camera on.
The PC recognizes the camera and the [Add New Hardware
Wizard] screen is displayed.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Optio 330RS and is the answer not in the manual?
Questions and answers