Related Manuals for EnGenius ENS620EXT
Summary of Contents for EnGenius ENS620EXT
- Page 1 Business Solutions User Manual ENS620EXT version 1.0 Dual Band Wireless AC1300 Outdoor Access Point...
- Page 2 IMPORTANT To install this Access Point please refer to the Quick Installation Guide included in the product packaging.
-
Page 3: Table Of Contents
Table of Contents Chapter 1 Product Overview..........4 2.4GHz/5 GHz SSID Profile............ 42 Key Features/Introduction............5 Wireless Security................42 Wireless MAC Filtering............... 44 System Requirements............... 6 Wireless Advanced..............45 Package Contents................. 7 Technical Specifications.............. 8 WPS Mixed-Enterprise: AP/WDS AP Mode......46 Physical Interface................10 Fast Roaming................. 48 WDS Link Settings............... -
Page 4: Chapter 1 Product Overview
Chapter 1 Product Overview... -
Page 5: Key Features/Introduction
Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright © 2016 EnGenius Technologies, Inc. All rights reserved. -
Page 6: System Requirements
to and from 5GHz capable computers, tablets or smart phones or transferring files. Several APs can be deployed System Requirements in a campus setting using the 5GHz band as a backhaul to provide multiple 2.4GHz wireless cells for computers or The following are the Minimum System Requirements in mobile devices in common outdoor areas. -
Page 7: Package Contents
Package Contents The AP package contains the following items:* • AP Access Point • 2 detachable 5 dBi 2.4 GHz Omni-directional Antennas • 2 detachable 5 dBi 5 GHz Omni-directional Antennas • PoE Adapter(EPA2410GP) • 3-pin IEC 320-C6 Power Cord • Pole Mount Ring x 2 • Wall Mount Screw Set • Quick Installation Guide *(all items must be in package to issue a refund):... -
Page 8: Technical Specifications
Technical Specifications WDS Station Standard: IEEE802.11ac/a/n on 5 GHz Management IEEE802.11b/g/n on 2.4 GHz Auto Channel Selection Antenna Multiple SSID: 16 SSIDs, 8 SSIDs per Radio 2 External SMA-type Antenna BSSID 2 x detachable 5 dBi 2.4 GHz Omni-directional Antennas SNMP V1/V2c/V3 2 x detachable 5 dBi 5 GHz Omni-directional Antennas MIB I/II, Private MIB VLAN Tag/VLAN Pass-through Physical Interface Clients Statistics 2 x 10/100/1000 Gigabit Ethernet Port with PoE support Save Configuration as User Default LAN1 Port: Proprietary 24V Input Fast Roaming... - Page 9 Wireless STA (Client) connection list Https Support SSH Support QoS (Quality of Service) Complaint with IEEE 802.11e standard Physical/Environment Conditions Operating: Temperature: -20 °C to 60 °C (-4 °F to 140 °F) Humidity (non-condensing): 90% or less Storage: Temperature: -30 °C to 80 °C (-22 °F to 176 °F ) Humidity (non-condensing): 90% or less...
-
Page 10: Physical Interface
Physical Interface Dimensions and Weights Length: 191.6 mm (7.54”) Width: 114.3 (4.49”) Depth: 47.7mm (1.88”) 1 2.4 GHz Antennas: Detachable 5 dBi 2.4 GHz Omni-directional 2 5 GHz Antennas Detachable 5 dBi 5 GHz Omni-directional 3 LAN Port 1 (Proprietary24V PoE): Ethernet port for RJ-45 cable. 4 LAN Port 2 : Ethernet port for RJ-45 cable. 5 LED Indicators: LED lights for Power, LAN Port 1, LAN Port 2, 2.4 GHz Connection and 5 GHz Connection. -
Page 11: Chapter 2 Before You Begin
Chapter 2 Before You Begin... -
Page 12: Computer Settings
Computer Settings Windows XP/Windows 7/Windows 8/Windows 1b. Move your mouse to the lower right hot corner to display the Charms Bar and select the Control Panel in Windows 8 OS. In order to use the Access Point, you must first configure the TCP/IPv4 connection of your Windows OS computer system. 1a. Click the Start button and open the Control Panel Windows 8 1c. - Page 13 4. Select Internet Protocol Version 4 (TCP/IPv4) and then 2a. In Windows XP, click Network Connections. select Properties. 2b. In Windows 7/Windows 8/Windows 10, click View Network Status and Tasks in the Network and Internet section, then select Change adapter settings. 3.
- Page 14 Note: Ensure that the IP address and Subnet mask are on the same subnet as the device. For example: ENH220EXT IP address: 192.168.1.1 PC I P a ddress: 1 92.168.1.2 – 1 92.168.1.255 PC Subnet mask: 255.255.255.0...
- Page 15 Apple Mac OS X 4. In Configure IPv4, select Manually. 1. Go to System Preferences (Which can be opened in the 5. Enter an IP address that is different from the Access Applications folder or selecting it in the Apple Menu). Point and Subnet mask then press OK.
-
Page 16: Hardware Installation
Hardware Installation 1. Remove the rear bottom panel. 2. Connect one end of the Ethernet cable into the LAN(PoE) port of the AP/Bridge and the other end to the PE port on the PoE Adapter. 3. Connect the Power cord with the PoE Adapter and plug 2.4GHz the other end into an electrical outlet. -
Page 17: Mounting The Ap
Mounting the AP Using the provided hardware, the AP can be attached to a wall or a pole. 1. Wall Mounting Kit 2. Pole Mounting Strap (Anchors: Φ5.5*18 mm & Bolts: Φ8*25mm) (Φ63.5*12.7 mm) Bolts Anchors... - Page 18 To attach the AP to a wall using wall mounting kit. 1. Determine where the Access Point to be placed and 3. Screw the included screws into the anchors. mark locations on a surface for the two mounting holes. 4. Place this Access Point against wall with the mounting Use an appropriate drill bit to drill two 8.1mm diagram heads.
- Page 19 To attach the AP to a pole using the provided pole mounting kit: 1. Thread the open end of the pole strap through the two 2. Lock and tighten pole strap to secure pole mount bracket to the pole. tabs on the Pole Mount Bracket.
-
Page 20: Install Ground Cable
Install Ground cable No outdoor APs are built to withstand a direct lightning strike. To prevent a directly ligtning stirke into outdoor APs, they should be properly grounded to a viable path for lightning surge to deliver to ground so that is does not go into the building network. -
Page 21: Chapter 3 Configuring Your Access Point
Chapter 3 Configuring Your Access Point... -
Page 22: Default Settings./Web Configuration
Configuring Your Access Point This section will show you how to configure the device 2. The default username and password are admin. using the web-based configuration interface. Once you have entered the correct username and password, click the Login button to open the web-base Default Settings configuration page. -
Page 23: Chapter 4 Building A Wireless Network
Chapter 4 Building a Wireless Network... -
Page 24: Access Point Mode
Before starting to configure this Access Point, you may realize the used scenario under varied operating modes.The AP has the ability to operate in various modes. This chapter describes purpose of different operating modes and lists down the operating modes for outdoor Access Points or Client Premise Equipments (CPE). Access Point Mode In Access Point Mode, AP behaves likes a central connection for stations or clients that support IEEE 802.11ac/a/b/g/n networks. The stations and clients must be configured to use the same SSID (Service Set Identifier) and security password to associate with the AP. The AP supports up to eight SSIDs per band at the same time for secure access. Access Point Client Client... -
Page 25: Client Bridge Mode
Client Bridge Mode The Access Point essentially acts as a wireless adapter that connects to an access point to allow a system of wireless access to the network in the Client Bridge mode. Since the computers are on the same subnet, the Access Point can broadcast to reach all end-devices. - Page 26 The AP can be used as a centralized Outdoor Access Point with which other EnGenius Wireless 802.11b/g/n 2.4 or ac/a/n 5 GHz Outdoor Client Bridges can associate; leveraging the long-range capability of their internal high-gain directional antennas, resulting in a very cost-effective solution to expand a company network over a multiple building campus. ENH202 ENH202 Client Bridge Client Bridge Client Access Point Client 2.4 GHz 2.4 GHz Client Client Client 5 GHz 5 GHz...
-
Page 27: Wds Ap Mode
WDS AP Mode The AP also supports WDS AP mode. This operating mode allows wireless stations to connect with Access Point via using WDS technology. In this mode, configure the MAC addresses or SSIDs in both Access Points to enlarge the wireless area by enabling WDS Link settings. WDS AP mode supports up to four (4) AP MAC addresses and four (4) SSIDs at the same time. -
Page 28: Wds Bridge Mode
WDS Bridge Mode In WDS Bridge Mode, the Accesss Point can wirelessly connect different LANs by configuring the MAC address and security settings of each Access Points. Use this operating mode when two wired LANs located a small distance apart want to communicate with each other. The best solution is to use the Access Point to wirelessly connect two wired LANs, as shown in the following diagram. WDS Bridge Mode can establish up to four (4) to eight (8) WDS links, creating a star-like network. Note: WDS Bridge Mode does not act as an Access Point. Access Points linked by WDS are using the same frequency channel. More Access Points connected together may lower throughput. This configuration can be susceptible to generate endless network loops in your network, so it is recommended to enable the Spanning Tree function to prevent this from happening. -
Page 29: Wds Station Mode
WDS Station Mode WDS station (WDS STA) mode expands the WDS by receiving a wireless signal/service and sharing it through the Ethernet port. With WDS STA mode, Access Point WDS AP on both 5 GHz or 2.4 GHz Access Point Access Point WDS Station WDS Station... -
Page 30: Chapter 5 Status
Chapter 5 Status... -
Page 31: Device Status
Overview Save Changes Note: VLAN ID is only applicable in Access Point, WDS AP or WDS BR mode. This page lets you save and apply the settings shown under Unsaved changes list, or Revert the unsaved changes and revert to the previous settings that were in effect. The Memory Information section shows usage of •... - Page 32 • The LAN Information section shows the Local Area Network settings such as the LAN IP Address, Subnet mask, Primary DNS Address, Secondary DNS Address, status of DHCP client, and status of Spanning Tree protocol (STP). The Wireless LAN Information 2.4 GHz/5 GHz section shows wireless information such as Operation Mode, Frequency, and Channel.
-
Page 33: Connection
Connections Realtime 2.4 GHz/5 GHz Connection List Realtime Click the connection link under the Overview menu displays The Realtime section contains the following options: the connection list of clients associated to the AP’s 2.4 CPU Loading: 3 minutes CPU loading percentage GHz/5 GHz, along with the MAC addresses and signal information, it displays current loading, average loading strength for each client. - Page 34 Traffic Loading: 2.4GHz and 5GHz and Ethernet port inbound and outbound traffic by current, average and peak time. Realtime Connection (Pkts): Overview on current active network connections. It displays UDP and TCP packets information and other connection status. UDP connections curve is in blue; TCP connection curve is in green; others curve is in red. Below of chart shows connections source and destination.
-
Page 35: Chapter 6 Network
Chapter 6 Network... -
Page 36: Spanning Tree Protocol Setting
Basic IPv4/IPv6 Settings Primary/Secondary DNS: The primary/secondary DNS address for this device. This page allows you to modify the device’s IP settings. Save: Click Save to confirm the changes. Spanning Tree Protocol (STP) Settings This page allows you to modify the Spanning Tree settings. Enabling the Spanning Tree protocol will prevent network loops in your LAN network. - Page 37 bridge in the spanning tree does not send a hello packet for a long period of time, it is assumed to be inactive. Forward Delay: Specifies Bridge Forward Delay in seconds. Forwarding delay time is the time spent in each of the Listening and Learning states before the Forwarding state is entered.
-
Page 38: Chapter 7 2.4 Ghz/5 Ghz Wireless
Chapter 7 2.4 GHz & 5 GHz Wireless... -
Page 39: Wireless Settings
2.4GHz and 5GHz SSID, *Band Balance: When band steering is configured to as welll as security settings must be the same. EnGenius Band Balance mode, the AP will steer dual band capable Band Steering supports following advanced settings, client devices to 5GHz when the RSSI value of these client devices on 5GHz radio is more than set one. -
Page 40: 2.4 Ghz/5 Ghz Wireless Network
Access Point on base stations and Access Points and is Client Bridge on Client Premise Equipements (CPE). Meanwhile, EnGenius outdoor devices also support WDS modes for peer to peer or peer to multi-peer connections. Wireless Mode: Scrow down this list to select wireless broadcasting standard on 2.4GHz and 5GHz frequency... - Page 41 *Default configuration: Default setting of channel assocaited client devices will be restricted at this number. selection is “All” to perform auto channel on the exist Aggregation: Integrate multiple data packets into one channel list. packet to deliver to client devices. This option reduces the number of packets, but also increases packet sizes.
-
Page 42: 2.4 Ghz/5 Ghz Ssid Profile
2.4 GHz/5 GHz SSID Profile Enable: Click this check box to enable this SSID interface. The default SSIDs are enable on the both first 2.4GHz and 5GHz SSID. SSID: Specifies the SSID for the current profile. Hidden SSID: Check this option to hide the SSID from clients. If checked, the SSID will not appear in the site survey. Client Isolation: Click the appropriate radio button to enable this function for allowing or preventing communication between client devices. -
Page 43: Wireless Security
Wireless Security Input Type: ASCII: Regular Text (recommended) The Wireless Security section lets you configure the AP’s Hexadecimal Numbers (For advanced users) security modes Key Length: Select the desired option and ensure that wireless clients use the same setting. Your choices are 64, 128, and 152-bit password lengths. Default Key: Select the Key you wish to be the default. Transmitted data is ALWAYS encrypted using the Default Key; the other Keys are for decryption only. You must enter a Key Value for the Default Key. - Page 44 * Setting of WPA-PSK, WPA2-PSK and WPA-PSK Mixed (Pre-Shared Key): Encryption: You may select AES, TKIP or Both (TKIP+AES) to be the encryption type you would like. Please ensure that your wireless clients use the same settings. Passphrase: Wireless clients must use the same Key to associate the device.
- Page 45 Radius Secret: Enter the secret required to connect to the Radius server. Radius Accounting: Enable or disable accounting feature. Radius Accounting Server: Enter the IP address of the Radius accounting server. Radius Accounting Port Enter the port number used for connections to the Radius accounting server.
-
Page 46: Wireless Mac Filtering
Wireless MAC Filtering Add: Click Add to add the MAC address to the MAC address table. Wireless MAC Filtering is used to allow or deny network Delete: Delete the selected entries. access to wireless clients (computers, tablet PCs, NAS, smartphones, etc.) according to their MAC addresses. You Save: Click Save to apply the changes. -
Page 47: Wireless Advanced
Wireless Advanced Save: Click Save to confirm the changes. Wireless Traffic Shaping Traffic shaping regulates the flow of packets leaving an interface to deliver improved Quality of Service. Enable Traffic Shaping: Default is disable. You may check this option to enable Wireless Traffic Shaping per SSID. Download Limit: Specifies the wireless transmission speed used for downloading. Upload Limit: Specifies the wireless transmission speed used for uploading. -
Page 48: Fast Roaming
Fast Roaming Enable the function to serve mobile client devices that roam from Access Point to Access Point. Some applications running on Client devices require fast re-association when they roam to a different Access Point Enable Fast Roaming: Enable or disable fast roaming Please enter the settings of the SSID and initialize the Security feature. -
Page 49: Wds Link Settings
WDS Link Settings 2.4 GHz/5 GHz WDS Link Settings Using the WDS (Wireless Distribution System) feature will allow a network administrator or installer to connect to Access Points wirelessly. Doing so will extend the wired infrastructure to locations where cabling is not possible or inefficient to implement. Note: Compatibility between different brands and models of Access Points is not guaranteed. -
Page 50: Guest Network Settings
Guest Network Settings the addresses by the DHCP server. Adding a guest network allows visitors to use the Internet without giving out your office or company wireless Ending IP Address: The last IP Address in the range of security key. You can add a guest network to each addresses assigned by the DHCP server. -
Page 51: Chapter 8 Management
Chapter 8 Management... -
Page 52: Management Vlan Settings
Management VLAN Settings This page allows you to assign a VLAN tag to packets sent DHCP server supports the reconfigured VLAN ID and over the network. A VLAN is a group of computers on a then reconnect to this AP using the new IP address. network whose software has been configured so that they behave as if they were on a separate Local Area Network (LAN). -
Page 53: Advanced Settings
Advanced Settings SNMP Settings SNMP Enable/Disable: Enables or disables the SNMP feature. This page allows you to assign the Contact Details, Location, Contact: Specifies the contact details of the device. Community Name, and Trap Settings for a Simple Network Location: Specifies the location of the device. Management Protocol (SNMP). SNMP is a networking management protocol used to monitor network attached Community Name (Read Only): Specifies the password devices. -
Page 54: Cli Settings/Email Alert
Engine ID: Specifies the engine ID for SNMPv3. Email Alert Apply Save: Click Apply Save to apply the changes. You can use the Email Alert feature to send messages to the configured email address when particular system CLI Settings events occur. Note: Do NOT use your personal email address as it can unnecessarily expose your personal email login credentials. - Page 55 Username: Enter the username for the email account that will be used to send emails. Password: Enter the password for the email account that will be used to send emails. SMTP Server: Enter the IP address or hostname of the outgoing SMTP server.
-
Page 56: Time Zone
Time Zone Time Setting Manually Set Date and Time: Manually specify the This page allows you to set the internal clock of the AP. date and time. Synchorize with PC: Click this button to synchorize Date and time of this AP with the PC. Automatically Get Date and Time: Select Automatically Get Date and Time and check whether you wish to enter the IP address of an NTP server or... -
Page 57: Auto Reboot Settings
Auto Reboot Settings You can specify how often you wish to reboot the AP. Auto Reboot Setting: Enables or disables the Auto Reboot function. Timer: Select the day and enter the time you would like to reboot automatically. Save: Click Save to apply the changes. -
Page 58: Wi-Fi Scheduler
Wi-Fi Scheduler SSID Selection: Select a SSID from the drop-down list. Schedule Templates: Select a schedule template from the The Wi-Fi Scheduler can be created for use in enforcing drop-down list. rules. For example, if you wish to restrict web access to Mon-Fri from 3pm to 8pm, you could create a schedule Day(s): Place a checkmark in the boxes for the desired days selecting Mon, Tue, Wed, Thu and Fri while entering a Start... -
Page 59: Tools
Tools Ping Test Parameters Start Ping: Click Start Ping to begin pinging the target device (via IP). This page allows you to analyze the connection quality Traceroute Target: Enter the IP address or domain name of the AP and trace the routing table to a target in the you wish to trace. - Page 60 Speed Test Parameters / LED Control This page allows you to implement speed test to realize LED Control the throughput of a target DUT. Control LED on/off for Power, LAN interface, or 2.4 GHz/5 GHz WLAN interface. Target IP / Domain Name: Enter an IP address or domain name you wish to impelement a speed test for realizing Power: Enables or disables the Power LED indicator.
- Page 61 Device Discovery This page allows you to discover devices from network for Operation Mode, IP Address, System MAC Address and Firmware version.
- Page 62 Firmware Account This page allows you to change the AP username and Firmware Upgrade password. By default, the username is: admin and the This page allows you to upgrade the firmware of the password is: admin. The password can contain from 0 to 12 alphanumeric characters and is case sensitive.
-
Page 63: Backup/Restore
Backup/Restore Backup Setting: Click Export to save the current This page allows you to save the current device configured settings. configurations. When you save your configurations, you also can reload the saved configurations into the Restore New Setting: To restore settings that have device through the Restore Saved Settings from a file been previously backed up, click Browse, select the section. - Page 64 User Setting Back Up Setting as Default: Click Backup to backup the user settings you would like to the device’s memory The function allows you to backup the current device for the default settings. configurations into the AP as the default value. If Restore to User Default: Click Restore to restore user extreme problems occur, or if you have set the AP settings to the factory standard settings.
-
Page 65: Log
System Log Log type You may choose one of log types to display logs in the following window. The default log types is All. The AP automatically logs (records) events of possible interest in its internal memory. To view the logged information, click the Log link under the System Manager menu. - Page 66 Logout Logout: Click Logout in Management menu to logout. Once you click reset button, you will see the options for reboot or restore this AP. Please confirm again to logout the system or not. Reboot the device: Click it to reboot this device. Restore to Factory Default: Click it to reset this device to factory default setting.
-
Page 67: Appendix
Appendix... -
Page 68: Federal Communication Commission Interference Statement
Appendix A Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 69: Ce Interference Statement
Appendix B - CE Interference Statement Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: • EN60950-1 Safety of Information Technology Equipment • EN50385 Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) • EN 300 328 Electromagnetic compatibility and Radio spectrum Matters (ERM);... - Page 70 This device is a 5GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services.
- Page 71 Français [French] Par la présente [nom du fabricant] déclare que l’appareil [type d’appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian] Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Need help?
Do you have a question about the ENS620EXT and is the answer not in the manual?
Questions and answers