Binary B-210-HDMATRIX-4X4 Owner's Manual

SPECIFICATIONS
Operating Temperature Range -5 to +35°C (-41 to +95 °F)
Operating Humidity Range 5 to 90 % RH (no condensation)
Input Video Signal 0.5-1.0 volts p-p
Input DDC Signal 5 volts p-p (TTL)
Signaling Rate 2.25 Gbit/s
Video Format Supported 1080p(24/60) / 1080i/ 720p /576p /480p /576i /480i
Max Deep Color 12bit
Audio Format Supported Up to DTS-HD, Dolby trueHD
Output Video HDMI 1.3
Maximum Transmission < 50 feet
Distance
CAT5/6 Transmission Distance 1080p can be extended to CAT5e 130 feet
or CAT6 160 feet.
Lip Sync YES
Switching Time Under 5 second (source/ TV dependant)
CEC YES
Power Consumption 12 watts (Max)
Dimensions 14.4 in x 4.4 in x 1.8 in
Weight 4.1 lbs
*Note: Specifications are subject to change without notice. Dimensions and weight are approximate.
OWNER'S MANUAL
B-210-HDMATRIX-4X4
Welcome to the Binary™ brand of products
The B-210-HDMARTIX-4x4 is a 4-by-4 HDMI true matrix switcher. It allows any HDMI source to be
shown on the any of the four outputs simultaneously.
You may also use the B-210-HDMATRIX-RECVR to extend the HDMI signal to the display over 2 CAT5/6
cables. The B-210-HDMATRIX-RECVR has the ability to receive HDMI signal and transmit IR from the
TV location back to the Matrix. Equalization and amplification settings also ensure HDMI signals'
transmission through long cable without quality loss.
The four CAT5/6 extender outputs are in parallel to the four HDMI port outputs and can be used
simultaneously if needed.
Binary™ HDMI 4X4 Matrix
>>
Switch, HDMI Version 1.3