Updating The Firmware Version - Withings Steel HR Installation And Operating Instructions Manual

7. Slide your finger on the wheel displayed in the app until the activity hand reaches
the 0 mark. Tap Next.
Note that the activity hand only moves in one direction.
8. Tap Done.
Your Withings Steel HR™ is now properly calibrated and the hands move to their correct
position to display the current time.

Updating the Firmware Version

We regularly offer new firmware versions so that you can benefit from the latest features we
add to our products. When a new firmware version is available, the Withings Health Mate®
app usually prompts you to install it through your Timeline.
Make sure you sync your Withings Steel HR™ before updating the firmware
version� Failing to do so will result in a loss of data�
However, you can check if updates are available and force their installation whenever
you want. To do so, perform the following steps:
1. In the Withings Health Mate® app, go to My devices.
2. Tap your Withings Steel HR™.
Withings Steel HR™
v1.0 | October, 2016
EN - 45